OPERATIONS (continued)
Basic Operation
The basic operations shown in Table 3 is performed from the supplied remote control transmitter or the projector control panel. Items indicated by (*) may be used from the control panel.
Table 3 . Basic Operation
Item | Description |
| Select Input Signal (*) : Press the INPUT button. |
| RGB IN 1→RGB IN 2→DVI→ VIDEO IN → |
| Select RGB Input : Press the RGB button. |
INPUT | VIDEO IN / |
RGB IN 1 → RGB IN 2 → DVI (→ RGB IN 1) | |
SELECT | Select Video Input : Press the VIDEO button. |
| RGB IN 1 / RGB IN 2 / DVI → VIDEO IN / |
| VIDEO IN → |
| • The selected signal name is displayed for approximately 3 seconds when the input |
| signal is changed. |
Set/Clear Position Adjustment Mode : Press the POSITION button.
The [ 
] icon is displayed in the POSITION mode.
| Image Position Adjustment: Press the , | , and | buttons in the | |
POSITION | POSITION mode. |
|
|
|
• Valid only in the MAGNIFY mode with a video signal is input. |
| |||
|
| |||
| • After approximately 10 seconds of inactivity the [ | ] icon is extinguished and the | ||
| POSITION mode is cleared automatically. |
|
| |
| • , , and | buttons may operate as the mouse control button. Refer to page 4. | ||
Initialize Each Item : Select an item and press the RESET button.
Initialize Position Adjustment : Press the RESET button and the RESET (*) POSITION mode. This function is valid only when RGB signal is input.
•Valid except for the VOLUME, LANGUAGE and H PHASE.
•The RESET button may operate as the mouse control button. Refer to page 4.
Set MAGNIFY Mode : Press the MAGNIFY | button. | ||
Move Magnified Area : Run the POSITION in the MAGNIFY mode. | |||
Adjust Magnification : Press the MAGNIFY | / |
| button in MAGNIFY |
| |||
MAGNIFY mode.
Clear MAGNIFY Mode : Press the MAGNIFY OFF button.
•The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUT SELECT or VIDEO, or by changing the input signal.
| Set/Clear FREEZE Mode : Press the FREEZE button. The [II] icon is | |
| displayed, and the image is frozen, in the FREEZE mode. | |
FREEZE | • The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE, | |
Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the | ||
| ||
| input signal. | |
| • Do not forget to clear frozen static images. |
NOTE • Strong light and obstacles will interfere with operation of the remote control transmitter.