Ask Proxima 9290 manual To change code of Projector, To change code of Remote Control Unit

Page 36

SETTING

E

Power management

This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain Lamp-life. (This projector is shipped with this function ON.)

Power Management function operates to turn Projection Lamp off when input signal is interrupted and any button is not pressed over 5 minutes. This function operates as follows;

1.When any input signal is interrupted, “No signal” and counting down display appears (for 5 minutes).

2.After counting down for 5 minutes, projector lamp and READY indicator are turned off.

3.When READY indicator flashing, Projection Lamp can be turned on again (Power Management mode).

In this Power Management mode, Projection Lamp is automatically turned on when input signal connected or projector is operated with any button on Top Control or on Remote Control Unit again.

Time left until Lamp off.

Press SELECT button at this icon to display other items.

On start

When this function is “On,” projector is automatically turned on just by connecting AC Power cord to a wall outlet.

Note ; Be sure to turn projector off properly (refer to section “TURNING OFF PROJECTOR” on P19). If projector is turned off in wrong steps, On Start function does not operate properly.

Remote control

This projector has two different remote control codes; factory-set normal code (Code 1) and secondary code (Code 2). This switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment together.

When operating projector in “Code 2,” both projector and Remote Control Unit must be switched to “Code 2.”

To change code of Projector;

Set Remote control in SETTING MENU to “Code 2.”

To change code of Remote Control Unit;

Press both MENU and IMAGE buttons on Remote Control Unit together for over 10 seconds.

After changing code, make sure Remote Control operates properly. To return to normal code (Code 1), operate both projector and Remote Control in ways above again.

NOTE : When batteries of Remote Control Unit are replaced or ALL- OFF switch is turned to “ALL-OFF,” remote transmit code automatically returns to normal code (Code 1).

Lamp counter reset

This function is used to reset Lamp Replace Counter. When replacing Projection Lamp, reset Lamp Replace Counter by using this function. Refer to page 39 for operation.

On start

Press SELECT button at this icon to display previous items.

Move pointer to item and then press

POINT LEFT/RIGHT button(s).

Move pointer to Lamp counter reset and then press SELECT button. Message “Lamp replace counter reset?” is displayed.

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Draft To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design ComputersColor Systems Component VideoPreparation Name of Each Part of ProjectorSETTING-UP Projector Connecting AC Power CordFor U.S.A. and Canada For Continental Europe 200 240 V ACPreparation Positioning Projector Room LightPreparation Adjustable Feet Moving ProjectorConnecting Projector Terminals of ProjectorAudio Input Jacks BNC Input JacksConnecting to Computer Terminals A ProjectorConnecting to Video Equipment Audio VideoOperation of Remote Control Before OperationLaser Pointer Function Volume Button Wired Remote JackZoom Button Focus ButtonTOP Controls and Indicators Ready IndicatorHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowSound Menu Turning on / OFF Projector Turning on ProjectorTurning OFF Projector Adjusting Screen Focus AdjustmentLens Shift Adjustment Keystone AdjustmentSound Adjustment Computer Input Selecting Input SourceSelecting Computer System InputPC Adjustment Auto PC AdjustmentComputer Input Automatic MULTI-SCAN System AutoComputer Input Manual PC Adjustment Computer Input Display areaDisplay area H Full screenComputer Input Compatible Computer Specifications Resolution640 x 31.469 59.940 1024 x 48.363 60.004Picture Image Adjustments Image Level Select DirectImage Level Select Menu Image 1~4Computer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoPb/Cb,Pr/Cr Source Select Menu VideoComponent Video Signal Format Selecting Video SystemVideo Input PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NCinema Image button Standard CinemaVideo Input Image Level Adjustment Reset Reset all adjustment to previous figure Quit Closes Image MenuSetting Setting MenuSetting Menu To change code of Remote Control Unit To change code of ProjectorSETTING/APPENDIX Operating Wireless MouseInstallation Operating Wireless MouseMaintenance AIR Filter Care and CleaningCleaning Projection Lens Appendix Lamp Replacement Lamp Replace CounterTroubleshooting Remote Control Unit Wireless MouseDoes not work Function does notTechnical Specifications Appendix Configurations of Terminals USB Connector Series BWarranty Deutsch D 2001 610 295 1417 1AA6P1P2971-- MA8F

9290 specifications

Ask Proxima 9290 is a cutting-edge device designed to enhance communication and productivity in various settings. Featuring a sleek design, the Proxima 9290 incorporates advanced technology to meet the needs of modern users. This versatile tool aims to streamline workflows and improve interaction between teams and clients alike.

One of the key features of the Proxima 9290 is its user-friendly interface. The device comes equipped with an intuitive touchscreen display that allows for easy navigation and access to its myriad functionalities. Whether users are accessing documents, making presentations, or participating in video conferences, the interface ensures a smooth and efficient experience.

A standout characteristic of the Proxima 9290 is its robust connectivity options. The device supports multiple wireless standards, including Wi-Fi 6, Bluetooth 5.0, and NFC capabilities. This enables seamless integration with other devices and platforms, allowing users to sync their data and collaborate effortlessly. The Proxima 9290 is designed for both in-office and remote work scenarios, making it a suitable choice for businesses adapting to flexible work environments.

In terms of performance, the Proxima 9290 is powered by a high-speed processor that can handle demanding tasks with ease. Its substantial memory and storage capacity ensure that users can run multiple applications simultaneously without experiencing lag. Additionally, the device is equipped with a long-lasting battery, providing users with the freedom to work without being tethered to a power source.

The Proxima 9290 also places a strong emphasis on security. It features advanced encryption protocols and secure access controls, ensuring that sensitive data remains protected. This is particularly important for businesses handling confidential information or complying with regulatory standards.

Moreover, the Proxima 9290 supports a variety of productivity-enhancing applications. From project management tools to customer relationship management systems, users can customize their device to fit their specific needs. This adaptability makes the Proxima 9290 an invaluable asset for teams looking to optimize their performance.

In conclusion, the Ask Proxima 9290 embodies a blend of aesthetics and functionality. With its user-friendly interface, strong connectivity options, high performance, robust security measures, and adaptability, it is poised to be a pivotal tool for enhancing communication and productivity in any professional setting.
Top Page Image Contents