Ask Proxima 9290 manual Turning on / OFF Projector, Turning on Projector, Turning OFF Projector

Page 19

BEFORE OPERATION

TURNING ON / OFF PROJECTOR

TURNING ON PROJECTOR

1

Complete peripheral connections (with Computer, VCR, etc.)

before turning on projector. (Refer to "CONNECTING TO

 

PROJECTOR" on pages 11~13 for connecting that equipment.)

2

Connect a projector's AC Power Cord into an AC outlet. LAMP

Indicator lights RED, and READY Indicator lights GREEN.

 

NOTE : When “On start” function is ON, this projector is turned

 

on automatically by connecting AC Power Cord to an

 

AC outlet. (Refer to pages 35, 36.)

3

Press POWER ON-OFF button on Top Control or on Remote

Control Unit to ON. LAMP Indicator dims, and Cooling Fans

start to operate. Preparation Display appears on a screen and count-down starts. Signal from PC or Video source appears after 30 seconds.

30

Preparation Display disappears after 30 seconds.

E

TURNING OFF PROJECTOR

1

Press POWER ON-OFF button on Top Control or on Remote

Control Unit, and a message "Power off?" appears on a screen.

2

Press POWER ON-OFF button again to turn off projector. LAMP

Indicator lights bright and READY Indicator turns off. After

 

projector is turned off, Cooling Fans operate (for 90 seconds).

 

During this "Cooling Down" period, this appliance cannot be

 

turned on.

3

When projector has cooled down, READY Indicator lights

GREEN again and you can turn projector on. After cooling down

completely, disconnect AC Power Cord.

TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.

Power off?

Message disappears after 4 seconds.

When “Power Management” function is ON, projector detects signal interruption and turns off Projection Lamp automatically. Refer to “Power Management” on pages 35 and 36.

When WARNING TEMP. Indicator flashes red, projector is automatically turned off. Wait at least 5 minutes before turning on projector again.

When WARNING TEMP. Indicator continues to flash, follow procedures below:

1.Press POWER ON-OFF button to turn a projector off and disconnect AC Power Cord from an AC outlet.

2.Check Air Filters for dust accumulation.

3.Clean Air Filters. (See "AIR FILTER CARE AND CLEANING" section on page 38.)

4.Turn a projector on again.

If WARNING TEMP. Indicator should still continue to flash, contact sales dealer where you purchased this projector or service center.

19

Image 19
Contents Draft To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Component Video Features and DesignComputers Color SystemsName of Each Part of Projector Preparation200 240 V AC SETTING-UP ProjectorConnecting AC Power Cord For U.S.A. and Canada For Continental EuropeRoom Light Preparation Positioning ProjectorMoving Projector Preparation Adjustable FeetBNC Input Jacks Connecting ProjectorTerminals of Projector Audio Input JacksTerminals A Projector Connecting to ComputerAudio Video Connecting to Video EquipmentBefore Operation Operation of Remote ControlLaser Pointer Function Focus Button Volume ButtonWired Remote Jack Zoom ButtonReady Indicator TOP Controls and IndicatorsOperating ON-SCREEN Menu HOW to Operate ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARSound Menu Turning on Projector Turning on / OFF ProjectorTurning OFF Projector Keystone Adjustment Adjusting ScreenFocus Adjustment Lens Shift AdjustmentSound Adjustment Input Computer InputSelecting Input Source Selecting Computer SystemAuto PC AdjustmentAuto PC Adjustment Computer Input Automatic MULTI-SCAN SystemComputer Input Manual PC Adjustment Full screen Computer InputDisplay area Display area H1024 x 48.363 60.004 Computer Input Compatible Computer SpecificationsResolution 640 x 31.469 59.940Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentSource Select Menu Video Video InputVideo Pb/Cb,Pr/CrPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System Video InputImage button Standard Cinema CinemaVideo Input Image Level Adjustment Closes Image Menu Reset Reset all adjustment to previous figure QuitSetting Menu SettingSetting Menu To change code of Projector To change code of Remote Control UnitOperating Wireless Mouse SETTING/APPENDIXOperating Wireless Mouse InstallationAIR Filter Care and Cleaning MaintenanceCleaning Projection Lens Lamp Replace Counter Appendix Lamp ReplacementTroubleshooting Function does not Remote Control UnitWireless Mouse Does not workTechnical Specifications USB Connector Series B Appendix Configurations of TerminalsWarranty Deutsch D 2001 610 295 1417 1AA6P1P2971-- MA8F

9290 specifications

Ask Proxima 9290 is a cutting-edge device designed to enhance communication and productivity in various settings. Featuring a sleek design, the Proxima 9290 incorporates advanced technology to meet the needs of modern users. This versatile tool aims to streamline workflows and improve interaction between teams and clients alike.

One of the key features of the Proxima 9290 is its user-friendly interface. The device comes equipped with an intuitive touchscreen display that allows for easy navigation and access to its myriad functionalities. Whether users are accessing documents, making presentations, or participating in video conferences, the interface ensures a smooth and efficient experience.

A standout characteristic of the Proxima 9290 is its robust connectivity options. The device supports multiple wireless standards, including Wi-Fi 6, Bluetooth 5.0, and NFC capabilities. This enables seamless integration with other devices and platforms, allowing users to sync their data and collaborate effortlessly. The Proxima 9290 is designed for both in-office and remote work scenarios, making it a suitable choice for businesses adapting to flexible work environments.

In terms of performance, the Proxima 9290 is powered by a high-speed processor that can handle demanding tasks with ease. Its substantial memory and storage capacity ensure that users can run multiple applications simultaneously without experiencing lag. Additionally, the device is equipped with a long-lasting battery, providing users with the freedom to work without being tethered to a power source.

The Proxima 9290 also places a strong emphasis on security. It features advanced encryption protocols and secure access controls, ensuring that sensitive data remains protected. This is particularly important for businesses handling confidential information or complying with regulatory standards.

Moreover, the Proxima 9290 supports a variety of productivity-enhancing applications. From project management tools to customer relationship management systems, users can customize their device to fit their specific needs. This adaptability makes the Proxima 9290 an invaluable asset for teams looking to optimize their performance.

In conclusion, the Ask Proxima 9290 embodies a blend of aesthetics and functionality. With its user-friendly interface, strong connectivity options, high performance, robust security measures, and adaptability, it is poised to be a pivotal tool for enhancing communication and productivity in any professional setting.