BenQ MP526, MP576, MP575, MP525P user manual Fine-tuning the image quality in user modes

Page 34

Setting the User 1/User 2 mode

There are two user-definable modes if the current available picture modes are not suitable for your need. You can use one of the picture modes (except the User 1/2) as a starting point and customize the settings.

1.Press Menu/Exit to open the On-Screen Display (OSD) menu.

2.Go to the PICTURE > Picture Mode menu.

3.Press / to select User 1 or User 2.

4.Press to highlight Reference Mode.

This function is only available when User 1 or User 2 mode is selected up in the Picture Mode sub-menu item.

5.Press / to select a picture mode that is closest to your need.

6.Press to select a menu item to be changed and adjust the value with / . See "Fine-tuning the image quality in user modes" below for details.

7.When all settings have been done, highlight Save Settings and press Mode/Enter to store the settings.

8.The confirmation message "Setting Saved" is displayed.

Fine-tuning the image quality in user modes

According to the detected signal type, there are some user-definable functions available when User 1 or User 2 is selected. Based on your needs, you can make adjustments to these functions by highlighting them and pressing / on the projector or remote control.

Adjusting Brightness

The higher the value, the brighter the image. And the lower the setting, the darker the image. Adjust this control so the black areas of the image appear just as black and that detail in the dark areas is visible.

Adjusting Contrast

The higher the value, the greater the contrast. Use this to set the peak white level after you have previously adjusted the Brightness setting to suit your selected input and viewing environment.

30

 

 

50

 

 

70

-30

 

 

0

 

 

30

Adjusting Color

Lower setting produces less saturated colors. If the setting is too high, colors on the image will be overpowering, which makes the image unrealistic.

Adjusting Tint

The higher the value, the more reddish the picture becomes. The lower the value, the more greenish the picture becomes.

34 Operation

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Welcome Table of contents Important safety instructions Safety InstructionsSafety Instructions 3000 m Feet Installation Projector features IntroductionShipping contents Front/upper side Projector exterior viewRear/lower side Controls and functions ProjectorMode Selects an available picture setupMode/Enter Activates the selected On-Screen Display OSD menu itemFreeze Remote controlVolume + Digital Zoom +Timer On Up/Down Remote control effective rangeReplacing the remote control battery Timer Set upFront Table Positioning your projectorChoosing a location Front CeilingObtaining a preferred projected image size Select your screen sizePositioning your projector Projection dimensions Connection VGA cableConnecting a monitor Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerConnecting Video source devices Connecting audioConnecting a Component Video source device To connect the projector to a Component Video source deviceConnecting an S-Video/composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Using the OSD menu Fine-tuning the image size and clarityUsing the remote control Correcting keystoneUsing the menus Use / to highlight the System Setup Basic menuSetting a password Using a security cable lockUtilizing the password function To the Security SettingsChanging the password If you forget the passwordEntering the password recall procedure Confirm the new password by re-entering the new passwordDisabling the password function Switching input signal Magnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Selecting a picture mode Using Wall ColorOptimizing the image Fine-tuning the image quality in user modes Selecting a color temperature Adjusting SharpnessAdjusting Brilliant Color About color temperaturesTo adjust the settings Setting the presentation timer Selection DescriptionYou can set the blank time in the System Setup Basic How to use the Timer On key?Hiding the image Utilizing FAQ function Freezing the imageOperating in a high altitude environment To activate the High Altitude ModeLocking control keys Turning off the Power On/Off Ring Tone Adjusting the soundAdjusting the sound level Personalizing the projector menu displayRow Configuring the Lan Control SettingsIf you are in a Dhcp environment If you are in a non-DHCP environmentMenu Exit Blank Auto Source Controlling the projector remotely through a web browserDetails Iiii Iiiv Once the cooling process finishes, a Power Off Ring Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system BasicAdvanced Informa Description of each menu Timer TemperatureSave Settings ColorAuto Power Off System Setup Basic menuMenu Settings Blank TimerLamp Settings System Setup Advanced menu Function DescriptionAudio Settings SettingsFAQ-Features Reset AllFAQ-Image Installation ServiceMaintenance Care of the projectorGetting to know the lamp hour Lamp informationExtending lamp life Timing of replacing the lamp Status MessageReplacing the lamp Maintenance Resetting the lamp timer Lamp events IndicatorsLight Status & Description Power events Thermal eventsTroubleshooting Cause RemedySpecifications Ceiling mount installation DimensionsMm W x 110 mm H x 217 mm D Timing chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsCopyright Warranty and Copyright informationLimited warranty DisclaimerEEC statement Regulation statementsFCC statement Weee directiveRegulation statements
Related manuals
Manual 68 pages 51.05 Kb

MP526, MP525, MP525P, MP575, MP576 specifications

BenQ has established itself as a significant player in the projector market, offering a diverse range of models catering to various applications, from education to business and home entertainment. The BenQ MP575, MP525P, MP576, MP526, and MP525 models represent a blend of advanced technology and user-friendly features designed to meet the needs of modern users.

The BenQ MP575 is renowned for its high brightness and excellent color accuracy, making it suitable for well-lit environments. With a brightness of 3000 ANSI lumens, users can expect clear and vibrant images, even in daylight. This model also incorporates BenQ's proprietary DLP technology, which enhances image sharpness and ensures long-lasting performance without color degradation.

Similarly, the BenQ MP525P presents itself as a versatile option with its lightweight design, making it ideal for on-the-go presentations. It offers a brightness of 2500 ANSI lumens and features a resolution of XGA (1024 x 768), ensuring that text and graphics are sharp and clear. It also supports various input sources, including HDMI, VGA, and USB, giving users flexibility in connectivity.

The BenQ MP576, another impressive model, is designed with enhanced networking capabilities, ideal for corporate environments where collaboration is key. This projector not only offers excellent image quality with a resolution of XGA but also includes features like LAN display, allowing multiple devices to connect wirelessly, thus simplifying the presentation process.

The MP526 mirrors some of the MP575's strengths while focusing on energy efficiency. It features a long lamp life of up to 5000 hours, which significantly reduces maintenance costs and ensures longer periods between lamp replacements. This characteristic is particularly appealing for organizations looking to minimize operational costs.

Last but not least, the BenQ MP525 boasts remarkable portability and ease of use, coupled with a quick start and shutdown feature. This projector is particularly suitable for educators and business professionals who require a reliable device that can be set up and packed away quickly.

All these models underscore BenQ's commitment to delivering high-quality projectors that cater to the needs of diverse users, with features designed to enhance the viewing experience, ensure reliable performance, and facilitate ease of use. Their combination of brightness, resolution, connectivity options, and portability makes them an excellent choice for anyone looking to invest in a projector for various applications.
Top Page Image Contents