BenQ MP525P, MP576 Configuring the Lan Control Settings, If you are in a Dhcp environment, Row

Page 42

Controlling the projector through a Lan environment (MP526/MP576 only)

Lan Control Settings allow you to manage the projector from a computer using a web browser when the computer and the projector are properly connected to the same local area network.

Configuring the Lan Control Settings

If you are in a DHCP environment:

1.Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the projector and the other end to the RJ45 port.

2.Press Menu/Exit and then press / until the SYSTEM SETUP: Advanced menu is highlighted.

3.Press to highlight Lan Control Settings and press Mode/Enter. The Lan Control Settings page is displayed.

4.Press to highlight Control By and press / to select RJ45.

5.Press to highlight DHCP and press / to select On.

6.Press to highlight Apply and press Mode/Enter.

7.Please wait for around 15 - 20 seconds, and then re-enter the Lan Control Settings page.

8.The Projector IP Address, Subnet Mask, Default Gateway, and DNS Server settings will be displayed. Note down the IP address displayed in the Projector IP Address

row.

If the Projector IP Address still does not appear, contact your ITS administrator.

If you are in a non-DHCP environment:

1.Repeat steps 1-4above.

2.Press to highlight DHCP and press / to select Off.

3.Contact your ITS administrator for information on the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server settings.

4.Press to select the item you want to modify and press Mode/Enter.

5.Press / to move the cursor and then press / to enter the value.

6.To save the setting, press Mode/Enter. If you do not want to save the setting, press Menu/Exit.

7.Press to highlight Apply and press Mode/Enter.

42 Operation

Image 42
Contents Welcome Table of contents Important safety instructions Safety InstructionsSafety Instructions 3000 m Feet Installation Projector features IntroductionShipping contents Projector exterior view Front/upper sideRear/lower side Controls and functions ProjectorMode Selects an available picture setupMode/Enter Activates the selected On-Screen Display OSD menu itemFreeze Remote controlVolume + Digital Zoom +Timer On Up/Down Remote control effective rangeReplacing the remote control battery Timer Set upFront Table Positioning your projectorChoosing a location Front CeilingObtaining a preferred projected image size Select your screen sizePositioning your projector Projection dimensions Connection VGA cableConnecting a monitor Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerConnecting Video source devices Connecting audioConnecting a Component Video source device To connect the projector to a Component Video source deviceConnecting an S-Video/composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Using the OSD menu Fine-tuning the image size and clarityUsing the remote control Correcting keystoneUsing the menus Use / to highlight the System Setup Basic menuSetting a password Using a security cable lockUtilizing the password function To the Security SettingsChanging the password If you forget the passwordEntering the password recall procedure Confirm the new password by re-entering the new passwordDisabling the password function Switching input signal Magnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Using Wall Color Selecting a picture modeOptimizing the image Fine-tuning the image quality in user modes Selecting a color temperature Adjusting SharpnessAdjusting Brilliant Color About color temperaturesTo adjust the settings Setting the presentation timer Selection DescriptionHow to use the Timer On key? You can set the blank time in the System Setup BasicHiding the image Utilizing FAQ function Freezing the imageTo activate the High Altitude Mode Operating in a high altitude environmentLocking control keys Turning off the Power On/Off Ring Tone Adjusting the soundAdjusting the sound level Personalizing the projector menu displayRow Configuring the Lan Control SettingsIf you are in a Dhcp environment If you are in a non-DHCP environmentControlling the projector remotely through a web browser Menu Exit Blank Auto SourceDetails Iiii Iiiv Once the cooling process finishes, a Power Off Ring Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system BasicAdvanced Informa Description of each menu Timer TemperatureSave Settings ColorAuto Power Off System Setup Basic menuMenu Settings Blank TimerLamp Settings System Setup Advanced menu Function DescriptionAudio Settings SettingsFAQ-Features Reset AllFAQ-Image Installation ServiceMaintenance Care of the projectorLamp information Getting to know the lamp hourExtending lamp life Timing of replacing the lamp Status MessageReplacing the lamp Maintenance Resetting the lamp timer Lamp events IndicatorsLight Status & Description Power events Thermal eventsTroubleshooting Cause RemedySpecifications Dimensions Ceiling mount installationMm W x 110 mm H x 217 mm D Timing chart Supported timing for PC inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsCopyright Warranty and Copyright informationLimited warranty DisclaimerEEC statement Regulation statementsFCC statement Weee directiveRegulation statements
Related manuals
Manual 68 pages 51.05 Kb

MP526, MP525, MP525P, MP575, MP576 specifications

BenQ has established itself as a significant player in the projector market, offering a diverse range of models catering to various applications, from education to business and home entertainment. The BenQ MP575, MP525P, MP576, MP526, and MP525 models represent a blend of advanced technology and user-friendly features designed to meet the needs of modern users.

The BenQ MP575 is renowned for its high brightness and excellent color accuracy, making it suitable for well-lit environments. With a brightness of 3000 ANSI lumens, users can expect clear and vibrant images, even in daylight. This model also incorporates BenQ's proprietary DLP technology, which enhances image sharpness and ensures long-lasting performance without color degradation.

Similarly, the BenQ MP525P presents itself as a versatile option with its lightweight design, making it ideal for on-the-go presentations. It offers a brightness of 2500 ANSI lumens and features a resolution of XGA (1024 x 768), ensuring that text and graphics are sharp and clear. It also supports various input sources, including HDMI, VGA, and USB, giving users flexibility in connectivity.

The BenQ MP576, another impressive model, is designed with enhanced networking capabilities, ideal for corporate environments where collaboration is key. This projector not only offers excellent image quality with a resolution of XGA but also includes features like LAN display, allowing multiple devices to connect wirelessly, thus simplifying the presentation process.

The MP526 mirrors some of the MP575's strengths while focusing on energy efficiency. It features a long lamp life of up to 5000 hours, which significantly reduces maintenance costs and ensures longer periods between lamp replacements. This characteristic is particularly appealing for organizations looking to minimize operational costs.

Last but not least, the BenQ MP525 boasts remarkable portability and ease of use, coupled with a quick start and shutdown feature. This projector is particularly suitable for educators and business professionals who require a reliable device that can be set up and packed away quickly.

All these models underscore BenQ's commitment to delivering high-quality projectors that cater to the needs of diverse users, with features designed to enhance the viewing experience, ensure reliable performance, and facilitate ease of use. Their combination of brightness, resolution, connectivity options, and portability makes them an excellent choice for anyone looking to invest in a projector for various applications.