User Controls
Security Settings
A. Press “Enter” to set password. (First time)
1.Password must be 4~8 bits, the default value is “0000”.
2.Displayed on the screen by “*” while inputting.
3.Use 
keys to select your input bits, and then press “Enter” key to confirm your selection.
4.Move to 
and then press the “Enter” key to confirm finally.
5.On this screen, press the “Menu” key which will automatically
jump to 
then press the “Enter” key to confirm your selection.
(“Menu” can be switched over between the position and 
at present)
6.When there is an input error go to 
to delete this bit. (You can press the “Menu”, key and then press the 
key.)
B. Press “Enter” to set security protection.
❖Security Mode
■On: Choose “On” to use security verification while the user switches on the projector.
■Off: When the user switches on projector without password.
■Timer: Displays the usable hours when switching on the projec- tor. When the time remaining is 0, the time out message will appear, and then press “Menu” or “Enter” to input password.
❖Timer Setting: When the Timer is selecting, this function can be used.
❖Change Password: Press “Enter” to change the password.
English ... | 28 |