Installation
Powering On/Off the Projector
Powering On the Projector
1. Remove the lens cap. 1
Quick Menu
Select Language
English
Deutsch
Français
Italiano
Español
Português
Nederlands
Polski
Press Enter to Set
2.Ensure that the power cord and signal cable are securely connected. The Power LED will flash green.
3.Turn on the lamp by pressing “Power/Standby” button on the control panel. 2 The Power LED will turn green.
The first time you use the projector, you can select your preferred language from the quick menu after the startup screen display.
4.Turn on your source (computer, notebook, video player,etc.). The projector will detect your source automatically.
If you connect multiple sources at the same time, use the “Source” button on the control panel or remote control to switch.
2
Power/Standby
Turn on the projector first and then the signal sources.
Lens Cap 1
11... English