Altec Lansing SDP-950STA, SDP-950DXA Connecting Computer, USB connection, RS-232C connection

Page 16

SDP-950

Connecting to output device

Connecting Computer

Connect a desktop PC and the presenter using USB cable and install the supplied program. You can see the projected image on the PC monitor and control the image using the program.

RS-232C connection is available for advanced user. If you connect a PC with RS-232C cable, you should set up your PC and make your own program to control the projected image on PC. Ask your dealer for further details.

USBconnection

Connect to the USB port on your PC,		Digital Presenter
then install the supplied SDP-950 Series program.
Caution	We recommend you to connect to USB port which is attached on computer main board.
	(It can make troubles in extended front-side USB port or USB hub without power in
	accordance with computers.) Be sure to use the USB	cable shorter than 5.0 m.

RS-232C connection

Connect the cable to the	Digital Presenter
RS-232C terminal on your PC.

RS-232C cable is not provided with the presenter.

You can obtain one from your computer dealer.

Page 16

Image 16

Contents SDP-950DXA/STA Special features Features Contents Safety precautions FCC Compliance StatementUses of digital presenter ConferenceMedicine and science areas Demonstration or exhibitionSupplied accessories Front side Name and function of each partLens Main control panel IR Sensor Remote control depository Main lock buttonLamp unit Document plateSDP-950DXA Main control panelSDP-950STA Terminals at the back Kensington Security Slot DVI OutputOn the remote controller INT/EXT Set preparation PC Monitor, Projector or DVI supporting devices Connecting to output deviceConnection USB connection Connecting ComputerRS-232C connection Kensington Security Slot Using the presenter To show the image received from external devicesEXT1 OUT, EXT2 OUT To project an object on the digital presenter French Focus on the object Adjusting image size Adjusting your imageAdjusting brightness Positive and negative switching Adjusting image colorImage sharpness control Image rotate control SDP-950DXA Only NTSC/PAL switchingSaving image in memory SDP-950DXA Only Screen 2 divide and image shift SDP-950DXA Only 3x3 Multi-Screen SDP-950DXA OnlySaving custom user setting Adjusting your image with GUI Menu and FunctionsZoom FocusBright Red / Blue AWCFreeze Rotate For the SDP-950DXA OnlySave / Recall For the SDP-950DXA Only Divide For the SDP-950DXA Only Shift For the SDP-950DXA OnlyCancel For the SDP-950DXA Only 3x3 Multi For the SDP-950DXA OnlyPreset Save / Exe Miscellaneous sectionAperture Nega EffectVideo Out Lamp Tips Drag and Drop FunctionChanging your image with Draw Draw toolbar disappeared GUI menu appearance Button ClickDrawing the single line Drawing the rectangularDrawing the freehand line Eraser ToolLine Width Selection Storage Fold the lamps on both sides completely Trouble shooting Battery replacement Close the lidSpecifications Specifications Description