Altec Lansing SDP-950DXA, SDP-950STA user manual Safety precautions, FCC Compliance Statement

Page 5

Safety precautions

Follow these safety instructions when setting up and using your Digital Presenter:

1.Do not place the presenter on an unstable cart, stand, or table.

2.Do not use the presenter near water or sources of heat.

3.Use the type of power source indicated on the presenter. If you are not sure of the power available, consult your dealer or power company.

4.Place the presenter near a wall outlet where the plug can be easily unplugged.

5.Take the following precautions for the plug. Failure to comply with these precautions could result in sparks or fire:

Do not insert the plug into an outlet with dust present. Insert the plug firmly into the outlet.

6.Do not overload wall outlets, extension cords, or integral convenience receptacles. This can cause fire or electric shock.

7.Do not place the presenter where the cord can be walked on. It may result in fraying or damage to the plug.

8.Unplug the presenter from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

9.Do not block the slots and openings in the presenter case. They provide ventilation and prevent the presenter from overheating. Do not put the presenter on a sofa, rug, or other soft surface or in a built-in installation, unless proper ventilation is provided.

10.Never push objects of any kind through cabinet slots. Never spill liquid of any kind into the presenter.

11.Except as specifically explained in this User's Manual, do not attempt to service this product yourself. Refer all servicing to qualified service personnel. Opening or removing covers may expose you to dangerous voltages and other hazards.

12.Unplug the presenter during lightning storms or when it will not be used for extended periods.

13.Do not place the presenter and remote controller on top of heat-producing equipment or in a heated place, such as a car.

14.Unplug the presenter from the wall outlet and refer servicing to qualified service personnel under the following conditions:

When the power cord or plug is damaged or frayed.

If liquid has been spilled into the presenter, or it has been exposed to rain or water.

If it does not operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service.

If it has been dropped or the cabinet has been damaged.

English French German

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Page 5

Italian Spanish

Image 5
Contents SDP-950DXA/STA Special features Features Contents FCC Compliance Statement Safety precautionsConference Uses of digital presenterMedicine and science areas Demonstration or exhibitionSupplied accessories Lens Name and function of each partFront side Main lock button Main control panel IR Sensor Remote control depositoryLamp unit Document plateSDP-950STA Main control panelSDP-950DXA Kensington Security Slot DVI Output Terminals at the backOn the remote controller INT/EXT Set preparation Connection Connecting to output devicePC Monitor, Projector or DVI supporting devices RS-232C connection Connecting ComputerUSB connection Kensington Security Slot To show the image received from external devices Using the presenterEXT1 OUT, EXT2 OUT To project an object on the digital presenter French Focus on the object Adjusting brightness Adjusting your imageAdjusting image size Image sharpness control Adjusting image colorPositive and negative switching Saving image in memory SDP-950DXA Only NTSC/PAL switchingImage rotate control SDP-950DXA Only 3x3 Multi-Screen SDP-950DXA Only Screen 2 divide and image shift SDP-950DXA OnlySaving custom user setting Menu and Functions Adjusting your image with GUIBright FocusZoom AWC Red / BlueRotate For the SDP-950DXA Only FreezeSave / Recall For the SDP-950DXA Only Shift For the SDP-950DXA Only Divide For the SDP-950DXA Only3x3 Multi For the SDP-950DXA Only Cancel For the SDP-950DXA OnlyMiscellaneous section Preset Save / ExeVideo Out Nega EffectAperture Tips Drag and Drop Function LampDraw toolbar disappeared GUI menu appearance Button Click Changing your image with DrawDrawing the rectangular Drawing the single lineDrawing the freehand line Eraser ToolLine Width Selection Storage Fold the lamps on both sides completely Trouble shooting Close the lid Battery replacementSpecifications Description Specifications