BenQ MX722 user manual Setting a preferred color temperature, 3D Color Management

Page 30

Setting a preferred color temperature

To set a preferred color temperature:

1.Highlight Color Temperature and select Warm, Normal or Cool by pressing

/ on the projector or remote control.

2.Press to highlight Color Temperature Fine Tuning and press MODE/ ENTER. The Color Temperature Fine Tuning page displays.

3.Press / to highlight the item you want to change and adjust the values by pressing / .

•R Gain/G Gain/B Gain: Adjusts the contrast levels of Red, Green, and Blue.

•R Offset/G Offset/B Offset: Adjusts the brightness levels of Red, Green, and Blue.

4.Press MENU/EXIT to exit and save the settings

3D Color Management

In most installation situations, color management will not be necessary, such as in classroom, meeting room, or lounge room situations where lights remain on, or where building external windows allow daylight into the room.

Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. Color management provides fine color control adjustment to allow for more accurate color reproduction, should you require it.

Proper color management can only be achieved under controlled and reproducible viewing conditions. You will need to use a colorimeter (color light meter), and provide a set of suitable source images to measure color reproduction. These tools are not provided with the projector, however, your projector supplier should be able to provide you with suitable guidance, or even an experienced professional installer.

The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you select each color, you can independently adjust its range and saturation according to your preference.

If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc, you can project any image from the disc on the screen and enter the 3D Color Management menu to make adjustments.

To adjust the settings:

1.Go to the PICTURE menu and highlight 3D Color Management.

2.Press MODE/ENTER on the projector or remote control and the 3D Color Management page displays.

3.Highlight Primary Color and press / to select a color from among Red, Yellow, Green, Cyan, Blue, or Magenta.

4.Press to highlight Hue and press / to select its range. Increase in the range will include colors consisted of more proportions of its two adjacent colors.

30 Operation

Page 29 Page 31
Image 30
Page 29 Page 31
Contents MX722 Digital Projector Table of contents Important safety instructions Safety InstructionsSafety Instructions 3000 m Feet Ceiling mounting the projector Projector features IntroductionShipping contents Projector exterior view Front/upper sideRear/lower side Controls and functions ProjectorRemote control ON/ OFF+/PAGE Mute Remote control effective rangeOperating the Laser pointer TestReplacing the remote control batteries Front Table Positioning your projectorChoosing a location Front CeilingOffset Projection dimensionsObtaining a preferred projected image size Inch Max AverageConnection ConnectionConnecting video source devices Connecting audioPlaying sound through the projector About the microphone input DeviceOperation Starting up the projectorAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityCorrecting keystone Using the menus Below is the overview of the OSD menuSetting a password Using a security cable lockUtilizing the password function Highlight Change Security Settings and press MODE/ENTERIf you forget the password Entering the password recall procedureChanging the password Switching input signal Disabling the password functionChanging Color Space Magnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Setting the User 1/User 2 mode Using Wall ColorSelecting a picture mode Go to the Picture Picture Mode menuFine-tuning the image quality in user modes Setting a preferred color temperature 3D Color ManagementSetting the presentation timer Resetting current or all picture modesSelection Description Freezing the image To cancel the timer, perform the following stepsRemote paging operations Top-Left Bottom-Left Top-Right Bottom-RightLocking control keys To activate the High Altitude ModeHiding the image Operating in a high altitude environmentAdjusting the sound Using the test patternUsing the teaching templates Direct power off Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system Wall ColorMin/30 min System Setup BasicSleep Timer 12 hrMain menu Sub-menu Options System Setup Advanced StatusIP Address Current System Status Description of each menu Color Temperature Picture ModeTemperature Fine Tuning 3D ColorSearch TimerInstallation Color SpaceOperation System Setup Basic menFunction Description RemoteAudio System Setup Advanced menu Function Description HighAltitude LampStandby System Setup Advanced menu Function DescriptionReset All NetworkSystem Information menu Function DescriptionCurrent StatusMaintenance Care of the projectorLamp information Setting Lamp Mode as EconomicSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Connect the power and restart the projector Resetting the lamp timer Lamp events IndicatorsLight Status & Description Power events Thermal eventsTroubleshooting Specifications Projector specificationsDimensions Ceiling mount installationTiming chart Supported timing for PC inputKHz Resolution Mode Frequency KHz MHz Supported timing for Hdmi Hdcp inputSupported timing for Component-YPbPrinput TimingSupported timing for Video and S-Video inputs Copyright Warranty and Copyright informationLimited warranty Disclaimer
Related manuals
Manual 62 pages 36.7 Kb

MX722 specifications

The BenQ MX722 is a highly versatile and feature-rich projector designed for both educational and professional environments. With its advanced technologies and user-friendly features, it delivers exceptional performance and reliability.

One of the standout features of the BenQ MX722 is its impressive brightness of 4000 ANSI lumens. This high level of brightness ensures that presentations and videos are clear and vibrant, even in well-lit rooms. Coupled with a native XGA resolution of 1024x768 pixels, the projector produces sharp images with excellent detail, making it ideal for showcasing detailed content.

The MX722 utilizes DLP technology, which enhances image quality and reliability. DLP projectors are known for their ability to produce consistent color and contrast, which is vital for maintaining viewer engagement during presentations. The projector's 15,000:1 contrast ratio further enhances image quality by providing deeper blacks and brighter whites, ensuring that visuals are striking and impactful.

In terms of connectivity, the BenQ MX722 is equipped with a comprehensive range of ports, including HDMI, USB, and VGA inputs. This diverse range of connection options allows users to easily connect various devices, from laptops to media players, without the need for additional adapters. The projector also features a built-in speaker, which enhances the audio experience during presentations without requiring external sound systems.

User-friendliness is another hallmark of the MX722. The projector is designed with a simple interface, making it easy to navigate settings and adjust parameters. It also features an automatic vertical keystone correction function, which helps to maintain image integrity even when the projector is not perfectly aligned with the screen.

In addition to its performance features, the BenQ MX722 is designed with energy efficiency in mind. It incorporates eco-friendly technologies that reduce power consumption, making it a cost-effective option for long-term use. The projector also has a long lamp life of up to 10,000 hours in Eco Mode, which minimizes maintenance costs and downtime.

Overall, the BenQ MX722 stands out as a reliable and high-performing projector suited for various professional and educational needs. With its robust features, impressive image quality, and user-friendly design, it provides an exceptional tool for presentations, lectures, and multimedia sharing.
Top Page Image Contents