BenQ MX722 System Setup Advanced menu Function Description, Standby, Network, Reset All

Page 46

5. SYSTEM SETUP: Advanced menu

Function

Description

 

Network

 

Selecting On enables the function. The projector is able to provide the

 

network function when it is in standby mode.

 

Microphone

 

Selecting On enables the function. The projector can output the

 

microphone signal when it is in standby mode and all the necessary

 

equipment is correctly connected. See "Playing sound through the

 

projector" on page 17 for details.

Standby

Monitor Out

Selecting On enables the function. The projector can output a VGA

Settings

signal when it is in standby mode and the COMPUTER-1jack is

 

correctly connected to devices. See "Connection" on page 16 for how

 

to make the connection.

 

Audio Pass Through

 

The projector can play sound when it is in standby mode and the

 

corresponding jacks are correctly connected to devices. Press / to

 

choose the source that you wish to use. See "Connection" on page 16

 

for how to make the connection.

 

Enabling this function slightly increases the standby power consumption.

 

 

 

Wired LAN

 

Projection Log In Code

 

See BenQ Network Projector Operation Guide for details.

Network

AMX Device Discovery

Settings

When AMX Device Discovery is On, the projector can be detected

 

by AMX controller.

 

MAC Address

 

Displays the mac address of this projector.

 

 

 

Returns all settings to the factory preset values.

Reset All

The following settings will still remain: Keystone, Phase, H. Size, User 1,

Settings

User 2, Reference Mode, Color Space Conversion, Language,

 

Projector Installation, High Altitude Mode, Security Settings,

 

Network Settings and Baud Rate.

 

 

46 Operation

Image 46
Contents MX722 Digital Projector Table of contents Important safety instructions Safety InstructionsSafety Instructions 3000 m Feet Ceiling mounting the projector Projector features IntroductionShipping contents Front/upper side Projector exterior viewRear/lower side Controls and functions ProjectorON/ OFF Remote control+/PAGE Mute Remote control effective rangeOperating the Laser pointer TestReplacing the remote control batteries Front Table Positioning your projectorChoosing a location Front CeilingOffset Projection dimensionsObtaining a preferred projected image size Inch Max AverageConnection ConnectionConnecting audio Connecting video source devicesPlaying sound through the projector About the microphone input DeviceOperation Starting up the projectorAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityCorrecting keystone Using the menus Below is the overview of the OSD menuSetting a password Using a security cable lockUtilizing the password function Highlight Change Security Settings and press MODE/ENTEREntering the password recall procedure If you forget the passwordChanging the password Disabling the password function Switching input signalChanging Color Space Magnifying and searching for details Selecting the aspect ratioAbout the aspect ratio Setting the User 1/User 2 mode Using Wall ColorSelecting a picture mode Go to the Picture Picture Mode menuFine-tuning the image quality in user modes Setting a preferred color temperature 3D Color ManagementResetting current or all picture modes Setting the presentation timerSelection Description Freezing the image To cancel the timer, perform the following stepsRemote paging operations Top-Left Bottom-Left Top-Right Bottom-RightLocking control keys To activate the High Altitude ModeHiding the image Operating in a high altitude environmentAdjusting the sound Using the test patternUsing the teaching templates Direct power off Shutting down the projectorMain menu Sub-menu Options Menu operationMenu system Wall ColorMin/30 min System Setup BasicSleep Timer 12 hrStatus Main menu Sub-menu Options System Setup AdvancedIP Address Current System Status Description of each menu Color Temperature Picture ModeTemperature Fine Tuning 3D ColorSearch TimerInstallation Color SpaceOperation System Setup Basic menFunction Description RemoteAudio System Setup Advanced menu Function Description HighAltitude LampStandby System Setup Advanced menu Function DescriptionReset All NetworkSystem Information menu Function DescriptionCurrent StatusMaintenance Care of the projectorLamp information Setting Lamp Mode as EconomicSetting Auto Power Off Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Connect the power and restart the projector Resetting the lamp timer Lamp events IndicatorsLight Status & Description Power events Thermal eventsTroubleshooting Specifications Projector specificationsDimensions Ceiling mount installationSupported timing for PC input Timing chartKHz Resolution Mode Frequency KHz MHz Supported timing for Hdmi Hdcp inputSupported timing for Component-YPbPrinput TimingSupported timing for Video and S-Video inputs Copyright Warranty and Copyright informationLimited warranty Disclaimer
Related manuals
Manual 62 pages 36.7 Kb

MX722 specifications

The BenQ MX722 is a highly versatile and feature-rich projector designed for both educational and professional environments. With its advanced technologies and user-friendly features, it delivers exceptional performance and reliability.

One of the standout features of the BenQ MX722 is its impressive brightness of 4000 ANSI lumens. This high level of brightness ensures that presentations and videos are clear and vibrant, even in well-lit rooms. Coupled with a native XGA resolution of 1024x768 pixels, the projector produces sharp images with excellent detail, making it ideal for showcasing detailed content.

The MX722 utilizes DLP technology, which enhances image quality and reliability. DLP projectors are known for their ability to produce consistent color and contrast, which is vital for maintaining viewer engagement during presentations. The projector's 15,000:1 contrast ratio further enhances image quality by providing deeper blacks and brighter whites, ensuring that visuals are striking and impactful.

In terms of connectivity, the BenQ MX722 is equipped with a comprehensive range of ports, including HDMI, USB, and VGA inputs. This diverse range of connection options allows users to easily connect various devices, from laptops to media players, without the need for additional adapters. The projector also features a built-in speaker, which enhances the audio experience during presentations without requiring external sound systems.

User-friendliness is another hallmark of the MX722. The projector is designed with a simple interface, making it easy to navigate settings and adjust parameters. It also features an automatic vertical keystone correction function, which helps to maintain image integrity even when the projector is not perfectly aligned with the screen.

In addition to its performance features, the BenQ MX722 is designed with energy efficiency in mind. It incorporates eco-friendly technologies that reduce power consumption, making it a cost-effective option for long-term use. The projector also has a long lamp life of up to 10,000 hours in Eco Mode, which minimizes maintenance costs and downtime.

Overall, the BenQ MX722 stands out as a reliable and high-performing projector suited for various professional and educational needs. With its robust features, impressive image quality, and user-friendly design, it provides an exceptional tool for presentations, lectures, and multimedia sharing.