BenQ MW721, MX720 manual m Feet

Page 5

Safety Instructions (Continued)

13.Do not place this projector in any of the following environments.

-Space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls and free flow of air around the projector.

-Locations where temperatures may become excessively high, such as the inside of a car with all windows rolled up.

-Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the projector's life span and darken the image.

-Locations near fire alarms

-Locations with an ambient temperature above 40°C / 104°F

-Locations where the altitudes are higher than 3000 m (10000 feet).

3000 m

(10000 feet)

0m

(0 feet)

14.Do not block the ventilation holes.

-Do not place this projector on a blanket, bedding or any other soft surface.

-Do not cover this projector with a cloth or any other item.

-Do not place inflammables near the projector.

If the ventilation holes are seriously obstructed, overheating inside the projector may result in a fire.

15.Always place the projector on a level, horizontal surface during operation.

-Do not use if tilted at an angle of more than 10 degrees left to right, nor at angle of more than 15 degrees front to back. Using the projector when it is not fully horizontal may cause a malfunction of, or damage to, the lamp.

16.Do not stand the projector on end vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector.

Important safety instructions

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents MX720/MW721 Digital Projector Table of contents Safety Instructions Important safety instructionsSafety Instructions 3000 m Feet Ceiling mounting the projector Introduction Projector featuresShipping contents Front/upper side Rear/lower side Projector exterior viewProjector Controls and functionsRemote control Replacing the remote control batteries Remote control effective rangeChoosing a location Positioning your projectorFront Table Front CeilingMX720 Obtaining a preferred projected image sizeMW721 Connection ConnectionPlaying sound through the projector Connecting video source devicesConnecting audio Audio output port About the microphone inputStarting up the projector OperationAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Fine-tuning the image clarityCorrecting keystone Below is the overview of the OSD menu Using the menusUtilizing the password function Using a security cable lockSetting a password If you forget the passwordDisabling the password function Entering the password recall procedureChanging the password Changing Color Space Switching input signalSelecting the aspect ratio Magnifying and searching for detailsMX720 MW721 About the aspect ratioSelecting a picture mode Using Wall ColorSetting the User 1/User 2 mode Go to the Picture Picture Mode menuSelecting a Color Temperature Fine-tuning the image quality in user modesAdjusting Brilliant Color 3D Color Management Setting a preferred color temperatureSelection Description Setting the presentation timerResetting current or all picture modes Remote paging operations To cancel the timer, perform the following stepsFreezing the image Top-Left Bottom-Left Top-Right Bottom-RightHiding the image To activate the High Altitude ModeLocking control keys Operating in a high altitude environmentTurning off the Power On/Off Ring Tone Adjusting the soundUsing the test pattern To select Blackboard or Whiteboard Using the teaching templatesShutting down the projector Direct power offMain menu Sub-menu Options Menu operationMenu system Basic Main menu Sub-menu Options System Setup Advanced Operation Description of each menu Temperature Picture menu Function Description Picture ModeColor Temperature Fine Tuning 3D ColorInstallation TimerSettings SearchOperation System Setup Basic menu Function DescriptionRemote ReceiverAltitude System Setup Advanced menu Function Description HighAudio LampReset All System Setup Advanced menu Function DescriptionStandby NetworkStatus CurrentSystem Care of the projector MaintenanceExtending lamp life Lamp informationGetting to know the lamp hour Status Message Timing of replacing the lampReplacing the lamp Connect the power and restart the projector Resetting the lamp timer Light Status & Description Power events IndicatorsLamp events Thermal eventsTroubleshooting Projector specifications SpecificationsCeiling mount installation DimensionsKHz Timing chartSupported timing for PC input Supported timing for Hdmi Hdcp input Timing Supported timing for Component-YP bP r inputSupported timing for Video and S-Video inputs Limited warranty Warranty and Copyright informationCopyright Disclaimer
Related manuals
Manual 61 pages 13.82 Kb

MW721, MX720 specifications

The BenQ MX720 and MW721 are two versatile projectors designed to meet the demands of educational and corporate environments, providing high performance and remarkable features that enhance presentations and classroom interactions.

Starting with the BenQ MX720, this projector boasts a maximum brightness of 4000 ANSI lumens, ensuring that images remain clear and vibrant even in well-lit rooms. Its native XGA (1024x768) resolution is complemented by a high contrast ratio of 13,000:1, which produces crisp images and detailed visuals. The MX720 employs DLP technology, known for its reliability and color accuracy, making it an ideal choice for presentations that require excellent image quality.

The MX720 also features a range of connectivity options, including HDMI, VGA, and USB ports, enabling users to easily connect various devices such as laptops, document cameras, and media players. With a 1.1x optical zoom lens, the projector allows flexible installation and easy adjustments to image size, ensuring that users can achieve the perfect projection for any setting.

On the other hand, the BenQ MW721 offers a higher resolution of WXGA (1280x800), making it suitable for displaying widescreen content. This projector also provides an impressive brightness level of 4000 ANSI lumens and a similar high contrast ratio of 13,000:1, ensuring excellent image quality across different lighting conditions. The DLP technology used in the MW721 contributes to sharp visuals and vibrant colors, making it a great option for movies, presentations, and detailed graphics.

Both projectors incorporate features like SmartEco technology, which adjusts lamp power dynamically to extend the lamp life while reducing energy consumption. This smart management prolongs the lifespan of the lamp to up to 10,000 hours, resulting in cost savings over time.

In addition, both models come equipped with 3D support, providing an immersive experience that can be leveraged for educational purposes or engaging presentations. The intuitive user interface of the projectors also simplifies setup and operation, allowing educators and professionals to focus more on their content and less on technology.

In summary, the BenQ MX720 and MW721 are powerful projectors that deliver exceptional image quality, versatility in connectivity, and advanced technologies. They cater to a wide range of environments, making them ideal tools for both education and professional presentations. Their combination of performance, reliability, and user-friendly features ensures that they meet the needs of modern users effectively.
Top Page Image Contents