American Power Conversion LCD Monitor Keyboard Mouse specifications Install the LCD

Page 13

Install the LCD

Note: Support the cable arm during installation of the LCD.

1.Insert the LCD into the rack using the slides attached to the LCD and those already installed in the rack.

1.Push the LCD into the rack until it stops. Pull the release keys (located on the outside of each LCD slide) while pushing the LCD into place.

2.Ensure that the LCD is installed on its rails properly by pulling the LCD in and out of the rack several times.

Rack LCD Monitor Keyboard Mouse Installation

9

Image 13

Contents Installation Specifications, Settings 您可以从包含的 CD 上获得本手册的中文版本。 Contents APC Limited Factory Warranty Preliminary Information Safety ConsiderationsGeneral Information Before Installation Inventory Attach the Cable Arm to the LCD Installation and RemovalInstall the Power Cord and Communication Cable Installation using square holes Install the SlidesInstallation using round or threaded holes Install the LCD Attach the Cable Arm to the Slide Remove the LCD Component Identification On-screen DisplayMain Menu Using the On-screen DisplayVertical bands are visible Image Adjust Sub-menuIcon Function Function Descriptions Colors Sub-menuAdvanced Sub-menu Languages Sub-menuWhat is seen Suggested Action Reference TroubleshootingProduct Information SpecificationsMaintenance Terms of Warranty APC Limited Factory WarrantyNon-transferable Warranty Exclusions Warranty Claims General policy Life-Support PolicyExamples of life-support devices Canada-ICES Radio Frequency InterferenceJapan-VCCI Taiwan-BSMI08/2006 990-1605B-001