7. After the driver has been installed, press “Enter” and continue
the Windows installation procedure as normal.
8. During the operating system installation, Windows may ask you
for the drivers for the SATA card again during the “Driver
Installation” part of the install. Please be prepared with the
floppy disk that was supplied with the card.
13
INSTALLING DRIVER IN A “FRESH” INSTALLATION OF WINDOWS
12
INSTALLING DRIVER IN A “FRESH” INSTALLATION OF WINDOWS
4. To specify additional devices such as the PCI Card, press “S”. The
following message will appear.
5. Insert the F5U198 driver diskette into your floppy drive and press
“Enter”.
6. Press “Enter” to select the “Silicon Image SiI 3112 SATARaid
Controller”.