Horizontal Angle Adjustment
1.
2.
3.
Hold the projector’s right and left sides and push it up slightly.
Adjust the horizontal angle so that it is correct for the orientation of the screen. The swivel angle can be set within a range of negative to positive 30 degrees.
30 |
Vertical Angle Adjustment
1.
2.
3.
Hold the projector’s right and left sides.
Adjust the vertical angle so that it is correct for the orientation of the screen. The tilt angle can be set in a range between
5
30
Swing Adjustment
1.Slightly loosen the M4 SCREW connecting the SQUARE TUBE and ADJUSTMENT ASSEMBLY as shown in the picture.
2.Adjust the angle so that it is correct for the orientation of the screen.
3.
4.The swing angle can be set within a range of negative to positive 30 degrees.
M4 SCREW
M4 SCREW
15 
15
Adjusting the Ceiling Bracket 9