BenQ PB6110 manual Lamp Information, Replacing the Lamp, Message Status

Page 37

Lamp Information

Warning Message

When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a mal- function in the projector and in some instances the lamp may break.

For more detailed information on lamp warnings, please refer to page 35.

The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact your dealer.

The following Lamp warning displays will remind you to change the lamp.

Message

Status

 

 

 

 

 

 

 

 

 

 

 

The lamp has been in operation for 1980 hours.

 

 

 

 

 

 

 

 

 

 

Install a new lamp for optimal performance. If the

 

 

 

 

 

projector is normally run with Preset "Economic

 

 

 

 

 

Mode" selected (page 26), you may continue to

 

 

 

 

 

operate the projector until the 2980 hour lamp

 

 

 

 

 

warning appears.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The lamp has been in operation for 2980 hours, the

 

 

 

 

 

 

 

 

 

 

power will shutdown in 20 hours time. A new lamp

 

 

 

 

 

should be fitted to avoid the inconvenience when the

 

 

 

 

 

projector runs out of lamp time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The lamp has been in operation for over 3000 hours.

 

 

 

 

 

This message will flash in the center of the screen

 

 

 

 

 

together with the Lamp indicator lighting up red for

 

 

 

 

 

40 seconds. The projector will shutdown after 40

 

 

 

 

 

seconds. The lamp MUST be replaced before the

 

 

 

 

 

projector will operate normally.

 

 

 

 

 

 

 

 

 

 

 

 

Replacing the Lamp

To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp.

To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp.

To reduce the risk of injuries to fingers and damage to internal components, use caution when removing lamp glass that has shattered into sharp pieces.

To reduce the risk of injuries to fingers and/or compromising image quality by touching the lens, do not touch the empty lamp compartment when the lamp is removed.

This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a proper manner.

Maintenance 33

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Welcome Disclaimer CopyrightTable of Contents Ordering Parts or Getting Information Iv Table of ContentsRefer servicing to qualified service personnel Important Safety InstructionsBut could fail if power cuts or surges Important Safety InstructionsSafety Instructions Bedding or any other soft surface Using the unit when it is not fullyMay result in a fire Zontal surface during operationSafety Instructions Introduction Projector FeaturesShipping Contents Optional Accessories Alternative AccessoriesProjector Exterior View Front / Upper SideFront adjuster foot Lamp door Rear adjuster foot Connector PanelBottom Side External Control Panel Controls and FunctionsFunctions Descriptions Remote Control DescriptionInstalling or Replacing the Battery Remote Control Effective RangeConnection Connecting to a Laptop or Desktop ComputerConnection Connecting Video and S-Video Devices Connecting Equipment to the Component Video InputAV equipment Video devices Video cableVideo devices Video cable Audio cable Connecting to Display DevicesChoosing a Location InstallationIV. Ceiling rear Press the adjuster button again to retract the foot Adjusting the HeightFocus ring Zoom ring Installation Screen SizePB6110 Svga / PB6210 XGA screen size chart 169 aspect ratio PB6110 Svga / PB6210 XGA screen size chart 43 aspect ratioStartup OperationOperation Shutdown Disconnect the power cord from the wall socketDigital Keystone Correction Press / on the remote control to display the status barFor example Source Selection Auto AdjustmentBlank Zoom / FocusingSlide Operation You can set the blank timeFreeze Preset Mode SelectionPresentation Vivid Video Economic Menu System Menu OperationOr 6/ 5on the remote control to select Using the MenusPicture menu KeystonePicture Menu Preset ModeKeystone BrightnessTint ColorAs above Increases or decreases the color intensity of the imagePro-Picture Menu Volume OSD Time Setting MenuReset MuteAdvance Menu Information Menu ResolutionSource Lamp HourCleaning the Lens MaintenanceCleaning the Projector Case Storing the ProjectorReplacing the Lamp Lamp InformationMessage Status Move the latch to another end as shown in the picture Light Status & Description Power Temp Lamp Power events IndicatorsResetting the lamp counter Temp InformationThermal events Light Status & Description Power Temp Lamp Lamp eventsProjector needs 110 seconds to cool down. Or Please contact your dealer for assistanceAccessories included in the standard package Service InformationOptional Accessories not included in the standard package Ordering Parts or Getting InformationPlug the power cord into the AC inlet on TroubleshootingMake sure that it is switched on Cause RemedyProjector Specifications SpecificationsSupported Timing for PC Input Timing ChartSupported Timing for Component-YPbPrInput Supported Timing for Video and S-Video InputsUnit mm Dimensions DimensionsLimited Warranty WarrantyWarranty FCC Statement Regulation StatementsEEC Statement MIC Statement

PB6110 specifications

The BenQ PB6110 is a versatile and compact projector that is perfect for both educational and business environments. Combining value and performance, the PB6110 stands out in a crowded market thanks to its advanced features and innovative technologies.

One of the key characteristics of the BenQ PB6110 is its impressive brightness. With a light output of 2,000 ANSI lumens, this projector ensures that images remain clear and vibrant, even in illuminated rooms. This makes it an excellent choice for presentations in classrooms, boardrooms, or even small auditoriums where ambient light may be a challenge.

The PB6110 boasts a native XGA resolution of 1024 x 768 pixels, providing sharp and detailed images. This native resolution is particularly suited for displaying detailed graphs, charts, and images, which are common in academic and professional settings. The projector also supports various resolutions including VGA, SVGA, and WXGA, allowing for compatibility with a wide range of devices.

Color accuracy is another strong feature of the BenQ PB6110. The projector utilizes advanced color processing technologies to deliver vibrant colors and high contrast ratios. This ensures that presentations have a professional finish, with colors appearing true to life. This is paramount in educational settings where graphs, images, and videos play a key role in enhancing learning.

The BenQ PB6110 also offers multiple connectivity options, including VGA and composite inputs, which makes it easy to connect to laptops, PCs, and even DVD players. The inclusion of a USB port allows for seamless presentation from USB flash drives, promoting convenience and flexibility.

A standout technology of the PB6110 is its eco-friendly design. The projector has a long lamp life of up to 4,000 hours in economic mode, significantly reducing the frequency of lamp replacements. This not only lowers running costs but also decreases environmental impact.

Additionally, the BenQ PB6110 includes a range of user-friendly features, such as quick setup, easy-to-use menus, and a lightweight design for portability. Weighing less than 3 kg, it is easy to transport, catering to mobile professionals who need to present in various locations.

In summary, the BenQ PB6110 is a reliable and efficient projector equipped with advanced technologies suitable for various environments. Its combination of brightness, resolution, color accuracy, connectivity options, and eco-friendly features make it an ideal choice for educators and professionals seeking an effective presentation tool.
Top Page Image Contents