Acer PD525P Problem The image is outstretched when displaying 169 DVD, Problem Image is reversed

Page 47

Appendices

Problem: The image is outstretched when displaying 16:9 DVD.

The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default setting.

If the image is still outstretched, you will also need to adjust the as- pect ratio by referring to the following:

Please select 4:3 aspect ratio type on your DVD player if you are playing a 16:9 DVD.

If you can’t select 4:3 aspect ratio type on your DVD player, please select 4:3 aspect ratio in the on screen menu.

Problem: Image is reversed.

Select “Image” from the OSD and adjust the projection direction. See page 24.

Problem: Lamp burns out or makes a popping sound

When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the “Replacing the Lamp”. See page 46.

Problem: LED lighting message

 

Power LED

Message

 

Temp LED Lamp LED

 

Red

Blue

Standby State

Slow Flashing

 

(Input power cord)

 

 

 

Lamp lighting

 

 

Power on

 

 

Power off (Cooling)

Quick Flashing

 

Error (Lamp fail)

 

 

Error (Thermal fail)

 

 

Error (Fan lock fail)

 

Flashing

Error (Over Temp.)

 

 

Error

 

 

(Lamp Breakdown)

 

 

=>Light On

=>Light Off

Image 47
Contents Manual for Disposal instructions Table of Contents Connecting to the WPG for the first time Usage Notice PrecautionsDon’t Introduction Product FeaturesPackage Overview IntroductionMain Unit Product OverviewControl Panel Below items are for PD525PW/PD527W only Connection PortsRemote Control with Laser Pointer Connecting the Projector InstallationInternet For Wireless functionPowering On the Projector Powering On/Off the ProjectorPowering Off the Projector Adjusting the Projector Image Height Adjusting the Projected ImageAdjusting Projection Image Size Adjusting the Projector Zoom / FocusControl Panel & Remote Control Aspect Ratio Laser ButtonFreeze HideDown Computer mode only Empowering KeyVolume Up Computer mode onlyLanguagefor PD523PD/PD525PD/PD527D only Wireless for PD525PW/PD527W onlyVideo ComponentOn Screen Display Menus How to operateContrast Display ModeColor Temperature BrightnessColor G White SegmentDegamma Color RProjection KeystoneAspect Ratio Tracking Position Horizontal PositionPosition Vertical Position FrequencyMenu Location ECO ModeAuto ShutdownMinutes Source LockAcer eOpening Management is a PC utility Lamp Reminding Lamp Hour ResetReset Lamp Hour ElapseMute VolumePower On/Off Volume Alarm VolumeTimer Display Timer StartTimer Period Timer VolumeLanguage Language Computer / Video ModeIntroduction Wireless projectionConnecting to the WPG for the first time Setting up your WPGDownloading the software Wireless projection Connecting to a projector Using the audio function Wireless projection Projector ID Configuration password setupConfiguring your Acer WPG Wireless projection Network settings Upgrade firmwareHotkey explanation Projector remote controlProjection controls Problem Partial, scrolling or incorrectly displayed image TroubleshootingProblem No image appears on screen Problem Image is out of focus Problem Image is unstable or flickeringProblem Image has vertical flickering bar Problem LED lighting message Problem The image is outstretched when displaying 169 DVDProblem Image is reversed Problem Lamp burns out or makes a popping soundReplacing the lamp Lamp Changing ProcedureProblem Message Reminders 10/100M Ethernet for /PD525PW/PD527W only SpecificationsAnalog Digital Compatibility ModesFCC notice Regulation & safety noticesRemarque à l’intention des utilisateurs canadiens Important safety instructions Radio device regulatory notice General FCC RF safety requirement