Acer X1160 manual Management setting, Security

Page 31

Management setting

19

English

Auto Shutdown

The projector will automatically shutdown when there is no signal

 

input after the allocated time. (in minutes)

 

 

Source Lock

When source lock is turned "off", the projector will search for

 

other signals if the current input signal is lost. When source lock is

 

turned "on", it will "lock" the current source channel unless you

 

press "Source" button on the remote control for the next channel.

 

 

Menu Location

Choose the menu location on the display screen.

 

 

Lamp Hour Elapse

Displays the lamp’s elapsed operating time (in hours).

 

 

Lamp Reminding

Activate this function to display a reminder to change the lamp 30

 

hours before its expected end-of-life.

 

 

 

 

Lamp Hour Reset

Press the

button after choosing "Yes" to turn the lamp hour

 

 

counter to 0 hours.

 

 

 

Security

Security

 

 

This projector provides a useful security function for the

 

administrator to manage usage of the projector .

 

Press

 

to change the "Security" setting. If the security function

 

is enabled, your must enter the "Administrator Password" first

 

before changing the security settings.

 

Select "On" to enable the security function. The user has to

 

 

enter a password to operate the projector. Please refer to the

 

 

"User Password" section for details.

 

If "Off" is selected, then the user can turn on the projector

 

 

without password.

Timeout(Min.)

Once "Security" is activated to "On", the administrator can set timeout function.

Press or to select the timeout interval.

The range is from 10 minute to 990 minutes.

When the time is up, the projector will prompt the user to enter the password again.

The factory default setting of "Timeout(Min.)" is "Off".

Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both "User Password" and "Administrator Password" can be accepted for this dialogue.

Image 31
Contents Acer Projector X1160/X1260 Series Users Guide Page Turning the product off before cleaning Information for your safety and comfortUsing electrical power Product servicing Additional safety informationPage Medical devices Operating environment for using wireless function OptionalPotentially explosive environments VehiclesDisposal instructions Mercury advisory Usage Notes PrecautionsContents Regulations and safety notices Introduction Product FeaturesPackage Overview Front / upper side Projector OverviewRear side Remote Control and Control Panel Layout Icon Function Description Remote Control PlacementGetting Started Connecting the ProjectorLens cap Turning the Projector On/OffTurning off the Projector To raise/lower the image Adjusting the Projected ImageMax From base to top Image cm C TopHeight Cm x H cm From base to top Image cm D Acer eView Management Acer Empowering TechnologyEmpowering Key Acer eTimer ManagementOnscreen Display OSD Menus Using the OSD menusColor setting Tint Image settingEnglish Security Management settingEnglish Audio setting Language setting Timer settingImage Problems and Solutions TroubleshootingProblem Solution English Condition Solution Problems with the ProjectorCondition Message Reminder OSD MessagesLED Messages LED & Alarm Definition ListingReplacing the Lamp Ceiling Mount Installation Attach the ceiling bracket to the ceiling rod English DLP SpecificationsBelow items are for X1260 series only VGA Analog Compatibility modesMac DV G3 Modes Resolution1280x768 Operation conditions FCC noticeCompliant with Russian regulatory certification Remarque à lintention des utilisateurs canadiensDeclaration of Conformity for EU countries Radio device regulatory notice GeneralList of applicable countries European Union EUFederal Communications Commission Declaration of Conformity Declaration of Conformity