Onkyo HT-R510 Connecting -compatible AV Components, Connecting -compatible Components, Example

Connecting -compatible AV Components

With (Remote Interactive) you can control your - compatible Onkyo CD player, DVD player, or cassette recorder with the HT-R510’s remote controller, and use the

following special functions:

■Auto Power On

When you turn on an AV component connected via while the HT-R510 is in Standby, the HT-R510 automatically turns on and selects that AV component as the input source.

This function will not work if the AV component’s power cord is connected to the HT-R510’s AC OUTLET, or if the HT-R510 is already on.

■Auto Source Select

When you press the play button on an AV component con- nected via , the HT-R510 automatically selects that AV component as the input source.

■Auto Power Off

When you set the HT-R510 to Standby, all AV components

connected via also enter Standby.

See page 41 for information on using the remote controller to control the other functions of your -compatible AV com- ponents.

Connecting -compatible Components

To use , you need to connect the HT-R510’s connector to the connector on the other AV component with an

cable. An cable is supplied with each -compatible CD player, DVD player, and cassette recorder.

Example:

Onkyo DVD player	Connecting several	-compatible
	Onkyo AV components

DIGITAL OUT

COAXIAL	REMOTE
	CONTROL

HT-R510

L

REMOTE

CONTROL

R

ANALOG

OUTPUT

connector

You must make an analog RCA/phono connection

cable between your HT-R510 and AV component, even if they are connected digitally.

Onkyo CD player

connector

Onkyo cassette recorder

COMPONENT VIDEO			ANTENNA
VIDEO 1 / 2 / 3 DVD IN	OUT		AM
IN
		Y
		PB
		PR	VIDEO 2
			IN
			REMOTE
DIGITAL INPUT			CONTROL
OPTICAL		COAXIAL
	2	1
IN	OUT	IN	IN

L

SUBWOOFER		L
PRE OUT
R		R
CD	TAPE	VIDEO 2

	FM
	75
				FRONT	FRONT	SURROUND	CENTER	AC OUTLET
								Disconnect the power
								AC 120V 60 Hz
				SPEAKERS B	SPEAKERS A	SPEAKERS	SPEAKER	SWITCHED
								cord before making
								120W 1 A MAX.
					L	L		any connections!
VIDEO 1		DVD	MONITOR
OUT	IN	IN	OUT	L
				VIDEO	R	R
				R
				S VIDEO
OUT	IN	FRONT	SURR	CENTER			SURROUND BACK
							SPEAKER
			L
					HT-R510
			R	SUB
VIDEO 1
			DVD	WOOFER

Notes:

•Push the plugs in all the way to make a good connection.

•Use only cables for connections.

•You must make an analog RCA/phono connection between your HT-R510 and the other AV component, even if they are connected digitally.

•If an AV component has two connectors, you can con- nect either one to the HT-R510. The other connector is for connecting additional -compatible components.

•Connect the HT-R510’s connector to only Onkyo AV components. Connecting to other manufacturer’s AV com- ponents may cause them to malfunction.

•Some Onkyo -compatible AV components may not support the special functions described above.

19