Onkyo HT-R510 instruction manual Adjusting Individual Speaker Volume

Page 27

Configuring Speaker Set A—Continued

CABLE/SAT

CD/DVD

 

CH +

 

CH SEL

LEVEL

/

TEST

 

 

 

VOLUME

/

Adjusting Individual Speaker Volume

With this function you can adjust the volume of each individ- ual speaker so that you can hear all speakers equally at the listening position.

Note:

You cannot use this function while the HT-R510 is muted (see page 32).

1

Press the remote controller’s

 

 

[TEST] button, and turn up the vol-

 

ume so that you can hear the test

 

tone sufficiently.

 

While each speaker outputs the test tone

 

(pink noise), its name appears on the dis-

 

play, as shown.

2

Use the remote controller’s

 

 

[CH SEL] button to select each

 

speaker, and use the LEVEL [ ] [ ]

 

buttons to adjust the volume.

Speakers are selected in the following order: Left → Center → Right → Surr Right → Surr Back → Surr Left → Sub- woofer.

You can adjust the volume of each speaker from –12 dB to +12 dB.

Notes:

•Only speakers that are included in the current configuration output the test tone. See “Specifying the Number of Speakers” on page 25.

•The subwoofer will not output the test tone if it’s off. See “Setting the Sub- woofer Mode” on page 25.

•If you don’t press any buttons for two seconds, the next speaker is selected automatically.

3

When you’ve adjusted each

 

 

speaker, press the remote control-

 

ler’s [TEST] button.

 

The test tone stops and the previous dis-

 

play reappears.

Note:

If no adjustments are made for two minutes, this function is cancelled automatically and the previous display reappears.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents HT-R510 Important Safeguards For Canadian Models PrecautionsImportant Safeguards For U.S. modelsAmp FM/AM Tuner Supplied AccessoriesFeatures Memory backupBattery compartment Close the battery compartment Before Using the HT-R510Installing the Batteries Using the Remote ControllerFront Panel Controls & ConnectorsControls & Connectors Display Controls & Connectors Rear Panel RC-518M Controls & Connectors Remote Controller-RCVR ModeOptical Digital Inputs Connecting Your AV ComponentsAV Cables & Connectors Before Making Any ConnectionsAudio Connection Formats Connecting Your AV Components Which Connections To Use?Using the AC Outlet Video Connection FormatsUsing Component Video Connecting a DVD playerUsing Composite Video Using S-VideoUsing Analog Connections Connecting Your AV ComponentsUsing Coaxial or Optical Connections Using Multi-channel ConnectionsConnecting a D-VHS Recorder Connecting Your AV Components Connecting a VCR for PlaybackConnecting a Camcorder, Games Console, etc Connecting Your AV Components Connecting a VCR for RecordingSatellite/cable tuner, LD player, etc Turntable without a Built-in Phono Preamp Using Analog Connections recording & playback Connecting a DAT or CD/MD RecorderConnecting a Cassette Recorder Using Coaxial or Optical Connections playback onlyConnecting -compatible AV Components Connecting -compatible ComponentsExample Installing Your Speakers Positioning Your SpeakersAttaching the Supplied Speaker Labels Installing Your Speakers Connecting Your Speakers Connecting Speaker Set aConnecting Speaker Set B Connecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Using a TV/FM Antenna Splitter Powering Up & Setting Up the HT-R510 Powering Up the HT-R510Important-Assigning Digital Inputs to Input Sources Setting the Subwoofer Mode Configuring Speaker Set aSpecifying the Number of Speakers Setting the Crossover Frequency Configuring Speaker Set aSpecifying Speaker Distances Adjusting Individual Speaker Volume Selecting the Source AV Component Setting the Input Signal FormatUsing Digital Inputs Playing Your AV ComponentsUsing the Multi-Channel Inputs Playing Your AV ComponentsEnabling the Tone Controls Tuning into Radio Stations Using the TunerUsing the Tuner Presetting Radio Stations Selecting Preset StationsDeleting Presets Displaying Source Information Muting the HT-R510 remote controller onlyCommon Functions Turning Speaker Sets On & OffUsing Headphones Common Functions Setting the Display BrightnessAdjusting the Speaker Balance Temporarily Using the Sleep Timer remote controller onlyAbout the Listening Modes Using the Listening ModesDSP Modes Using the Listening ModesBasic Modes Surround ModesSurround button Using the Listening Modes Selecting the Listening ModesDirect button Stereo buttonUsing the Audio Adjust Functions Audio Adjust FunctionsAudio Adjust Functions Recording Recording the Input SourceRecording from Different AV Sources Entering the Manufacturer’s Code RC-518MUsing the RC-518M VCR mode TV mode Control Buttons Input Selectors Cable mode Satellite modeCABLE/SAT CableSymptom Possible cause Remedy TroubleshootingAmp Remote controller Symptom Possible cause Remedy TroubleshootingTuner Recording Others Symptom Possible cause Remedy Amplifier Section SpecificationsOnkyo U.S.A. Corporation Onkyo Europe Electronics GmbHOnkyo China Limited

HT-R510 specifications

The Onkyo HT-R510 is a versatile home theater receiver designed to provide an enhanced audio experience for movie lovers and music enthusiasts alike. With its collection of features and technologies, this receiver offers an impressive balance of performance and user-friendly functionality.

One of the standout features of the HT-R510 is its capability to deliver 5.1-channel surround sound, making it an excellent choice for creating an immersive home theater environment. The receiver is equipped with multiple audio formats, including Dolby Digital and DTS, ensuring high-quality sound reproduction that brings cinematic experiences right into the living room.

The HT-R510 boasts a robust power output, delivering up to 100 watts per channel into 8 ohms. This amount of power allows it to drive a range of speakers effectively, ensuring clear and impactful sound at all listening levels. Additionally, the receiver comes with a range of connection options, including six audio inputs, two optical inputs, and multiple composite video inputs, making it easy to integrate various audio and video components.

Another key characteristic of the HT-R510 is its sophisticated DSP (Digital Signal Processing) capabilities. This technology allows for a multitude of listening modes tailored to enhance specific types of content, such as movies, music, and gaming, providing listeners with a customized audio experience that maximizes enjoyment.

In terms of user-friendly features, the HT-R510 is equipped with an easy-to-navigate on-screen display that simplifies the setup process and adjustment of settings. The included remote control further enhances usability, allowing users to control their entire audio-visual setup from the comfort of their couch.

Furthermore, the HT-R510 supports both FM and AM radio, offering additional entertainment options. Its sleek design fits easily into any home décor, making it a stylish addition to any media setup.

Overall, the Onkyo HT-R510 is a solid choice for those seeking an affordable yet powerful home theater receiver. With its range of features, advanced audio technologies, and user-friendly design, it allows individuals to enjoy high-quality sound and an engaging multimedia experience in the comfort of their own home. Whether you’re watching movies, playing games, or listening to music, the HT-R510 is built to elevate your audio experience to new heights.
Top Page Image Contents