PYLE Audio PRJSD188 Problem Possible situation No power If open the power key, Projector, Again

Page 5

Caution

About the installation

 

About Open and close the projector

In order to improve the projector service life,

It shouldnot place in a wet and

 

when open the projector ,connect

ventilation condition

 

 

 

the power cable and press the "power"

Donot put the projector under the sunshine

key on the panel .the projector will

directly

 

work ,but the lamp will be bright more

Projector working temperature: 0

+70

and more .After 5 minutes, the lamp work

normally

Projector store temperature : -20

+70

 

Donot block the ventilation-window

 

when close the projector , press the power

 

key again . And then the lamp shut off.

of projector

 

But the fans still work until 5minutes later.

If the projector interior temperature

 

When close the projector ,donot pull out

are too hot , the machine will be shut

 

the power cable directly . After 5minutes,

off automatically.This is hot -

 

the projector will shut off automatically.

protected system.

 

 

So please clean the filter of projector per month . It is very important. Donot let the dust cover the filter.

Warning

Fans will adjust the temperature It is controlled by system when the projector work, the fans turn slowly or quickly so the fans noise are different But it is normal

when the projector work ,donot pull out the pwer cable If the fans stop to work,it will cause the projector interior temperature very high, so it may damage the projector.

Trouble shooting

The projector operation is very simple . Just like to use TV.

please refer to this chapter when you encounter a problem

Problem

Possible situation

No power

 

If open the power key

Remote control

If there is no batteries in the remote control

If have obstruction between remote control

cannot open or

close the

and projector

projector

If have strong ray on the projector

 

 

This machine just turn off . You should

 

wait 5minutes and open the machine

 

again.

3

24

Image 5
Contents Read the manual carefully,before use the projector ALL-IN-ONE LCD ProjectorContents Output signal Input signalPower consumption LCDModelTrouble shooting If there is no batteries in the remote control Problem Possible situation No power If open the power keyIf have obstruction between remote control ProjectorMaintenance Installation4pcs screws Projector Installation2pcs screw Installation method Projector installationPlay the external Hdmi signal as following Hdmi and USB settingInput port instuction Play the USB function as followingDigital setup Projector installDigital setup Image display reflected 90degreeSpeaker setup DVD menu operation settingPanel keystoke sketch map Audio setup DVD menu operation setting Panel keystoke instructionVideo setup Adjust the image trapeziod Remote control reciverClose operation Language setupOpen operation Focus adjustment Image adjustmentTrapeziod correction ScreenMenu setting method Menu settingKey Menu entre into Image Volume Function System setting It means it has continuous adjustable parameter