Proxima ASA DP6870 manual Input Menu Description, Rgb, Black

OPERATIONS (continued)

Input Menu

The following functions are available when INPUT is selected on the menu. Select an item with the and buttons, and start or stop operation with the and buttons. The function indicated (**) are effective on video input mode only, not on RGB input mode, except in the P.IN P. window on RGB input mode.

SETUP	INPUT	IMAGE	OPT.	ENGLISH
AUTO		EXECUTE
RGB		CANCEL
VIDEO
VIDEO NR
Progressive
BLACK
HDTV

Table 5. Input Menu

Item	Description
	Automatic Adjustment at RGB Input: Select the EXECUTE with the	button.
	Horizontal position (H.POSIT), vertical position (V.POSIT), clock phase (H.PHASE),
	and horizontal size (H.SIZE) are automatically adjusted. Use with the window at
	maximum size in the application display.
AUTO	Automatic Adjustment at Video Input: Select the EXECUTE with the	button. A
	signal type appropriate for the input signal is selected automatically when EXECUTE
	is selected automatically. Valid only when AUTO is set for VIDEO on the menu.
	• This operation requires approximately 10 seconds. It may not function correctly with
	some input signals. Pressing the AUTO button in this case may correct this problem.
	• This function is the same as for the AUTO function in Basic operation.

Displays RGB Input Frequency: Displays the horizontal and vertical sync signal

RGB	frequencies for RGB input.
	• Valid only at RGB input.
	Select Video Signal Type: Select the signal type with the	and	buttons.
	Select NTSC, PAL, SECAM, NTSC4.43, M-PAL, or N-PAL as appropriate for the
	input signal. The selection of AUTO enables and executes the function AUTO
	(Automatic Adjustment at Video Input), except for the N-PAL input.
	• Use this function when the image becomes unstable (eg. the image becomes
VIDEO (**)	irregular, or lacks color) at VIDEO/S-VIDEO input.
	• Automatic Adjustment requires approximately 10 seconds. It may not function
	correctly with some input signals. Pressing the AUTO button in this case may correct
	this problem except for the N-PAL input.
	• For the COMPONENT VIDEO input, this function is not effective and the signal type
	is distinguished automatically. Refer to the item HDTV of the OPT. Menu for the
	signal of HDTV.

Set/Clear Noise Reduction Mode: Select the TURN ON / TURN OFF with the VIDEO NR / button. When the TURN ON is selected, the NR mode is active and the noise on

(**)screen of the video input will be reduced.

• Valid except for the HDTV.

Select Progressive Mode: Select the mode suitable for the input signal with the

and buttons. The TV mode and the FILM mode convert the interlaced video signal Progressive into the progressive signal. The FILM mode is adptable 2-3 Pull-Down system to the

(**)conversion.

• Use this function to raise resolution, at the interlaced video input except HDTV signal.

	Set/Clear Black Enhancement Mode: Select the TURN ON / TURN OFF with the
BLACK(**)	/ button. When the TURN ON is selected, the black enhancement mode is
	active and the contrast ratio of the screen for the video input will be raised by making
	black level darker.
HDTV (**)	Select HDTV mode: Select the 1035i mode or 1080i mode suitable for the input
	signal with the / button.

ENGLISH-13