Proxima ASA DP6870 manual Air Filters, Other Maintenance

Page 21

MAINTENANCE (continued)

Air Filters

Cleaning Air Filters

This projector uses 2 air filters. These air filters should be cleaned as described below at intervals of approximately 100 hours.

1.Switch the projector power supply OFF, and remove the power cord from the power outlet.

2.Remove the filter cover and the air filter.

3.Clean the air filter with a vacuum cleaner.

4.Set the air filter and the filter cover.

Replacing the Air Filter

filter cover

filters

ENGLISH

Replace the air filter if contamination cannot be removed, or if it is damaged.

1.Switch the projector power supply OFF, and remove the power cord from the power outlet.

2.Remove the filter cover and the old filter.

3.Set the new filter and the filter cover.

CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “Safety

Instruction” thoroughly to ensure that maintenance is performed correctly.

•Replace the air filter if contamination cannot be removed, or if it is damaged. Contact your dealer in such case. For the optional air filter, see the item “Optional Parts” of the Table 12.

•Do not use the equipment with the air filter removed.

•When the air filter is clogged with dust etc. the power supply is switched OFF automatically to prevent the temperature rising inside the projector.

Other Maintenance

Maintenance Inside the Equipment

For safety reasons, ensure that the equipment is cleaned and checked by the dealer once every two years. Maintaining the equipment by yourself is dangerous.

Cleaning the Lens

Gently wipe the lens with lens cleaning paper. Do not touch the lens with your hands.

Cleaning the Cabinet and Remote control transmitter

Gently wipe with a soft cloth. If dirt and stains etc. are not easily removed, use a soft cloth dampened with water, or water and a neutral detergent, and wipe dry with a soft, dry cloth.

CAUTION • Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate “Safety

Instruction” thoroughly to ensure that maintenance is performed correctly.

•Do not use detergents or chemicals other than those noted above (e.g. benzene or thinners).

•Do not use cleaning sprays.

•Do not rub with hard materials, or tap the equipment.

NOTE • When this projector is brought into a warm room from a cold outdoor, condensation can take place on the projection lens and mirror inside, blurring the screen and reducing your eyesight, but do not worry. The condensation will disappear and the screen will return to a normal condition no sooner than the projector acclimates to the surrounding temperature.

ENGLISH-19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Presentation Solutions QR55041 Users GuideUsers Guide ContentsFeatures Contents of packageBefore USE Part Names Before USEENGLISH-4 Loading the Batteries Installation of the Projector and Screen InstallationAngle Adjustment Installation ReferenceInstallation CablingCabling Power Connection Example of System SetupPlug & Play Power OFF Power onOperations StandbyOperations Basic OperationBasic Operation Description Set / Clear Keystone Mode Press the Keystone button Select Mode of P.IN P. Display Press the PinP buttonNormal menu Single menu Menu Display Start/Stop Press the Menu buttonSetup Menu Setup MenuInput Menu Description Input MenuRGB BlackImage Menu Description Image MenuMyScreen MirrorOptions Menu Options MenuSelect Menu Background Color Select with Operation Start/Stop PressNo Signal Menu No Signal MenuMaintenance LampLamp Life Maintenance Resetting the Lamp TimerReplacing the Lamp Air Filters Other MaintenanceMessage Contents TroubleshootingOSD Message OSD MessageIndicators Message TroubleshootingIndicators Message IndicatorSymptom SymptomSymptom Possible cause Remedy Specifications SpecificationsENGLISH-24 Dimension Diagram Signal Connector Pin AssignmentTechnical Technical Example of computer signalInitial set signals PS/2, ADB or Serial Mouse Connection to the Mouse ControlUSB Mouse PS/2 MouseSerial Mouse ADB MouseCommand data Communications settingRS-232C communication ProtocolChanging the projector settings Set command Requesting projector status Get commandUsing the projector default settings Reset Command Increasing the projector setting value Increment commandCRC Be EF BA D2 Be EF FD D3 Be EF Ntsc PAL RGB Be EF EN 55022 Warning Regulatory NoticesFCC Statement Warning For the Customers in Canada Pour les utilisateurs au CanadaWarranty Limitation and Exclusion Limitation of Liability Garantieeinschränkung UND -AUSSCHLUSS Haftungseinschränkung Page Page

DP6870 specifications

Proxima ASA DP6870 is an innovative digital projector designed to deliver an exceptional visual experience in various environments, including corporate settings, educational institutions, and home theaters. This model stands out due to its impressive combination of features, cutting-edge technologies, and robust characteristics.

One of the main features of the Proxima ASA DP6870 is its advanced image projection capabilities. The projector boasts a native resolution of 1920x1080 pixels, ensuring sharp, clear images that maintain high levels of detail. With a brightness level of 4500 ANSI lumens, the DP6870 can perform effectively in both dimly lit rooms and well-lit spaces, making it a versatile choice for different lighting conditions.

The DP6870 also employs state-of-the-art DLP (Digital Light Processing) technology, which enhances color accuracy and provides a smooth viewing experience free from motion blur. This technology is particularly advantageous for presentations that incorporate dynamic content such as videos and animations. The projector’s impressive contrast ratio of 3000:1 further enhances image quality, ensuring deeper blacks and vibrant colors.

Connectivity is another strong point of the Proxima ASA DP6870. The projector features multiple input options including HDMI, VGA, and USB ports, allowing for easy connection to a variety of devices such as laptops, Blu-ray players, and gaming consoles. This flexibility ensures that users can seamlessly integrate the projector into their existing technology setups.

Durability and ease of use are also key characteristics of the DP6870. The projector is built with reliability in mind, featuring a long-lasting lamp life of up to 5000 hours. This longevity reduces the need for frequent replacements, making it a cost-effective choice for long-term use. Additionally, the user-friendly interface and remote control functionality simplify operation, allowing users to focus on their presentations rather than technical details.

In summary, the Proxima ASA DP6870 is a high-performance digital projector that combines advanced image projection capabilities, robust connectivity options, and long-lasting durability. Its blend of DLP technology, impressive brightness, and easy usability makes it an excellent choice for anyone seeking a reliable and powerful projector for various applications.
Top Page Image Contents