5.SOFTWARE AND COMPUTER INTERFACE
5.1 Power Monitoring Software
The UPSMON series software (or other power monitoring software) is applied standard
5.2 Interface Kits
A series of interface kits is available for operation systems that provide UPS monitoring. Each interface kit includes the special interface cable required to convert status signals from the UPS into signals which individual operating system recognize. The interface cable at UPS side must be connected to REMOTE PORT, at computer side can be either COM 1 or COM 2. The other installation instructions and powerful features please refer to READ.ME file.
5.3 The characteristics of computer interface port
The computer interface port has the following characteristics:
The communication port on the back of the UPS may be connected to host computer. This port allows the computer to monitor the status of the UPS and control the operation of the UPS in some cases. Its major functions normally include some or all of the following:
To broadcast a warning when power fails.
To close any open file before the battery is exhausted.
To
Some computers are equipped with a special connector to link with the communication port. In addition, special
Attention: UPSMON software and interface port function just available for model name with “P” affix. The standard
10