3M MP8640 manual Hold the STANDBY/ON button for 3-5 seconds, Turn Off the Power

Page 12

3.3 Turn Off the Power

1

1

2

3

1

2

Hold the STANDBY/ON button for 3-5 seconds.

• The ON indicator blinks orange and the lamp turns off.

After approximately 1 minute, the fan stops and the indicator stays orange.

Turn the MAIN POWER switch of the projector off.

Caution: Do not turn off the MAIN POWER switch before pressing the STANDBY/ON button. After the STANDBY/ON button is pressed, the fan rotates for about 1 minute to cool the projector.

3

4

Close the lens shutter.

• Push up on the lens cover switch to close.

Disconnect cables.

3M™ Multimedia Projector MP8640

© 3M 1997

12

Image 12

Contents MP8640 Multimedia Projector Table of Contents Safeguards Intended USEWarranty Thank YOU for Choosing 3MContents of Shipping Box Optional AccessoriesUnpack Keep Your Packaging MaterialsMachine Characteristics Product DescriptionMain Unit Identification Input buttonSystem Set Up connecting various equipment Remote Control Transmitter Identification Stick SwitchInstallation Basic OperationsTurn the Main Power switch of the projector on Turn Off the Power Hold the STANDBY/ON button for 3-5 secondsAdjustment and Functions To return to the factory default setting√ Highlight Setup option √ To reset the entire Setup menu √ To reset a single item from Setup menuHow To Use Foot Adjusters Side viewBrightness ColorSize Color BALRGB1 RGB2VIDEO1 VIDEO2Image BlankReveal OPT LanguageConnection to Signal Terminals Connection to the Video Signal TerminalConnection to the RGB Signal Terminal Example of computer signal Connection to the Control Signal Terminal Mouse emulationRS 232 Control Cable not included with basic packout Maintenance Cleaning the Air FilterMessage Table Lamp Display Lamp Operation HoursReplacing the Lamp When You Think Something Is Wrong Symptom Cause SolutionTechnical Specifications SpecificationsAccessories Dimension Diagram 3M Austin Center 3M Canada 3M Mexico, S.A. de C.V 3M Europe