Remote control, Putting batteries | 3M X20 specification

Remote control

Putting batteries

Please set the batteries to the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place.

Holding the hook part of the battery cover, remove it.

Align and insert the two AA batteries according to their plus and minus terminals

as indicated in the remote control.

3. Replace the battery cover in the direction of the arrow and snap it back into place.

WARNING ►Always handle the batteries with care and use them only as directed. Improper use may result in battery explosion, cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

•Be sure to use only the batteries specified. Do not use batteries of different types at the same time. Do not mix a new battery with used one.

•Make sure the plus and minus terminals are correctly aligned when loading a battery.

•Keep a battery away from children and pets.

•Do not recharge, short circuit, solder or disassemble a battery.

•Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry place.

•If you observe a leakage of a battery, wipe out the flower and then replace a battery. If the flower adheres your body or clothes, rinse well with water immediately.

•Obey the local laws on disposing the battery.

About the remote control signal

The remote control works with the projector’s remote sensor. This projector has a remote sensor on the front.

The sensor senses the signal within the following range when the sensor is active:

60 degrees (30 degrees to the left and right of the sensor) within 3 meters about.

30º 30º Approx. 3 m

NOTE • The remote control signal reflected in the screen or the like may be available. If it is difficult to send the signal to the sensor directly, attempt to make the signal reflect.

•The remote control uses infrared light to send signals to the projector (Class 1 LED), so be sure to use the remote control in an area free from obstacles that could block the remote control’s signal to the projector.

•The remote control may not work correctly if strong light (such as direct sun light) or light from an extremely close range (such as from an inverter fluorescent lamp) shines on the remote sensor of the projector. Adjust the position of projector avoiding those lights.

X20 specifications

The 3M X20 is an advanced filtration system recognized for its state-of-the-art technology and exceptional performance in air and water purification. With a focus on versatility and efficiency, the X20 is designed for various applications, ranging from home use to industrial settings.

One of the key features of the 3M X20 is its innovative multi-stage filtration process. This system utilizes a combination of mechanical and chemical filtration techniques to effectively trap a wide range of contaminants. The primary pre-filter captures larger particles such as dust and allergens, ensuring that the air circulated is clean and healthy. Following this, the HEPA filter captures even finer particles, including pollen and pet dander, making it an ideal choice for allergy sufferers.

In addition to particulate filtration, the X20 incorporates advanced activated carbon technology. This feature is critical for removing odors and volatile organic compounds (VOCs) from both air and water. The carbon media is specifically designed to enhance adsorption capabilities, resulting in improved air quality and a more pleasant indoor environment.

Another notable characteristic of the 3M X20 is its efficiency rating, which often exceeds industry standards. The device is equipped with energy-efficient motors that operate quietly, minimizing energy consumption while maximizing filtration effectiveness. This characteristic makes it suitable for continuous use in residential and commercial applications without the concern of rising energy costs.

Durability and ease of maintenance are also significant aspects of the X20. The system is built with high-quality materials that ensure longevity and reliability. Users can easily replace filters without the need for specialized tools, which simplifies the maintenance process and encourages regular upkeep.

Convenience is further enhanced by the user-friendly control panel, which displays real-time air quality readings and allows for easy adjustments. Some models even feature smart connectivity, enabling users to monitor the system remotely via mobile apps.

In summary, the 3M X20 stands out due to its multi-stage filtration process, activated carbon technology, energy efficiency, and ease of maintenance. These features collectively ensure that it provides high-quality air and water purification, making it a vital addition to both residential and industrial spaces. The combination of cutting-edge technologies and user-centric design propels the 3M X20 into the forefront of filtration solutions, ensuring a healthier environment for everyone.