Onkyo TX-SR8440 Advanced Setup, Advanced Speaker Settings, Crossover Frequency, Double Bass

Page 51

TX-SR304_En.book Page 51 Tuesday, January 24, 2006 10:01 AM

Advanced Setup

Advanced Speaker Settings

The advanced speaker settings cannot be changed while headphones are connected, Speaker set B is on, or the multichannel input is being used.

Crossover Frequency

This setting only applies to the speakers that you speci- fied as Small in the “Speaker Configuration” on page 34. To get the best bass performance from your speaker sys- tem, you need to set the crossover frequency according to the size and frequency response of your speakers.

1

Press the [RECEIVER] REMOTE

 

RECEIVER

MODE button, followed by the

 

[SETUP] button.

SETUP

 

2

Use the Up and Down [ ]/[ ]

 

buttons to select “1. SP Config,”

 

and then press [ENTER].

 

ENTER

3

Use the Down [ ] button to

 

select “Crossover,” and then use

the Left and Right []/[ ] but- tons to select a crossover fre- quency.

Use the diameter of the smallest speaker in your system when choosing the crossover frequency.

Speaker cone

Crossover

diameter

frequency

 

 

Over 8 in.

40/50/60Hz

(20 cm)

 

 

 

6-1/2 to 8 in.

80Hz

(16–20 cm)

 

 

 

5-1/4 to 6-1/2 in.

100Hz (default)

(13–16 cm)

 

 

 

3-1/2 to 5-1/4 in.

120Hz

(9–13 cm)

 

 

 

Under 3-1/2 in.

150/200Hz*

(9 cm)

 

 

 

*Choose the setting suitable for the speaker.

Continue with step 4 of the “Double

Bass” setting below.

Notes:

•For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly.

•Choose a higher crossover frequency if you want more sound from your subwoofer.

Double Bass

With the Double Bass function, you can boost bass out- put by feeding bass sounds from the front left and right channels to the subwoofer. This function can be set only if the Subwoofer setting (step 3) is set to Yes, and the Front setting (step 4) is set to Large in the Speaker Con- figuration on page 34.

4

Use the Down [ ] button to

 

select “Double Bass,” and then

use the Left and Right []/[ ] buttons to select:

On: Double Bass function on. Bass from the front left and right channels is also fed to the subwoofer (default).

Off: Double Bass function off.

5

Press the [SETUP] button.

 

 

Setup closes.

 

When you want to go back up one

SETUP

menu level to “SP Config,” press the

 

[RETURN] button.

51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents TX-SR8440 Avis Important Safety InstructionsPower PrecautionsPrecautions Supplied AccessoriesContents FeaturesFront Panel Front & Rear PanelsDisplay Front & Rear PanelsK L M Rear PanelBefore Using the AV receiver Installing the BatteriesUsing the Remote Controller Remote Controller How to Use the Remote ControllerReceiver Mode Remote Controller DVD Mode To select your CD player as the input source, press CD ModeMD, & CDR Mode MD or CD recorderCDR Playlist / buttons HDD ModeTo select your HDD component as the input source, press Album +/- buttonReverse Play button Tape ModePlay button Stop buttonSpeaker Set B Sub Room Enjoying Home TheaterSpeaker Sets a and B Speaker Set a Main RoomAttaching the Speaker Labels Connecting Your SpeakersSpeaker Connection Precautions Speaker ConfigurationSpeaker Set B Speaker Set a Connecting Your SpeakersConnecting Speaker Connecting a Powered SubwooferOther Models Connecting AntennaConnecting the AM Loop Antenna Connecting the Indoor FM AntennaUsing a TV/FM Antenna Splitter Connecting AntennaConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaAV Connection Color Coding Connecting Your ComponentsAbout AV Connections Optical Digital JacksVideo Connection Formats Connecting Your ComponentsConnecting Both Audio & Video Which Connections Should I Use?Video Connection DVD Player to AV Receiver to TV Connecting a DVD PlayerAudio Connection Multichannel Audio ConnectionMultichannel Connection DVD player TV, projector Connecting a VCRConnecting a VCR for Playback Video Connection VCR to AV Receiver to TVConnecting a Camcorder, Games Console, or Other Device Connecting a VCR for RecordingVideo Connection Satellite, cable, set-top box, etc RF OUTPhono preamp Connecting a CD Player or TurntableCD Player or Turntable with Built-in Phono Preamp CD player Turntable MM with Built-in phono preampConnecting an HDD-compatible Component Audio Only Connecting a Cassette, CDR, MiniDisc, or DAT RecorderCassette recorder CDR, etc Remote Control Connecting Onkyo ComponentsConnecting the Power Cord Auto Power On/StandbyHave you connected a component to a digital audio input? Turning OnTurning On the AV Receiver Smooth Operation in a Few Easy StepsFirst Time Setup Assigning Digital Inputs to Input SourcesChanging the Input Display First Time Setup Left and Right Buttons to Select Small, Large, or None Press the Setup buttonTesting the speakers Use the Down Button toStart playback on the source component Select a suitable listening mode and enjoyPlaying Your AV Components Basic AV Receiver OperationUsing the Multichannel Input Playing Your AV ComponentsDisplaying Source Information Listening to the Radio Using the TunerTuning into Radio Stations AM Frequency Step Setup Not North America and EuropeSelecting Preset Stations Using the TunerPresetting Radio Stations Deleting PresetsUsing RDS European models only What is RDS?Program Types Used in Europe PTY Displaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Common Functions Using HeadphonesSetting the Display Brightness Adjusting the Bass & TrebleMuting the AV Receiver Using the Sleep TimerPress the remote controller’s Muting button Common FunctionsMultichannel DVD Input Adjusting Speaker LevelsHeadphones Speaker Set BSelecting on the AV receiver Using the Listening ModesSelecting with the Remote Controller Selecting Listening ModesDTS Using the Listening ModesAbout the Listening Modes Onkyo Original DSP ModesDTS Adjusting the Listening Modes Using the Audio Adjust FunctionsInput Channel Settings PL II Music Mode Settings Adjusting the Listening ModesUsing the Late Night Function Dolby Digital only Using the CinemaFILTERRecording Recording the Input SourceRecording from Different AV Sources Double Bass Advanced SetupAdvanced Speaker Settings Crossover FrequencyAdvanced Setup Speaker DistanceSpeaker Levels Digital Input Signal Formats Press the Receiver Remote Mode button Correcting Sound and Picture SyncInput Selector Troubleshooting Troubleshooting Functions don’t work? Sound changes when I connect my head- phones?Can’t record? How do I change the language of a multiplex source?General SpecificationsAmplifier Section Video SectionMemo Onkyo China Limited Onkyo U.S.A. CorporationOnkyo Europe Electronics GmbH Onkyo Europe UK Office

TX-SR304E, TX-SR404, TX-SR8440 specifications

Onkyo has established itself as a noteworthy name in the world of home theater receivers, offering a range of models suited for various audio needs. Among these, the TX-SR304E, TX-SR404, and TX-SR8440 stand out with their distinctive features and technologies, catering to audiophiles and casual listeners alike.

The TX-SR304E is an entry-level receiver that packs a punch in terms of performance and functionality. This 5.1-channel receiver boasts 75 watts per channel, ensuring it can deliver a robust audio experience for movies and music. It features Dolby Digital and DTS decoding, making it a great option for those who wish to enjoy surround sound. The straightforward user interface makes it easy to set up and operate, and it supports a variety of audio formats, including WMA, MP3, and PCM. Its multiple input options, including optical and coaxial connections, provide flexibility to connect various audio sources.

Moving up the line, the TX-SR404 offers enhanced capabilities with its more powerful output and additional features. With 100 watts per channel, it adds not only volume but also clarity across a wider range of audio frequencies. This 7.1-channel receiver supports advanced sound processing technologies, such as Dolby TrueHD and DTS-HD Master Audio, ensuring an immersive cinematic experience. The inclusion of Onkyo’s proprietary AccuEQ makes room calibration a breeze, delivering tailored audio settings based on the acoustics of your space. HDMI connectivity allows for high-definition audio and video through a single cable, making installation simpler and cleaner.

At the top of the range, the TX-SR8440 presents a premium option for serious home theater enthusiasts. It features a robust 130 watts per channel output and supports 7.2 channels, allowing for a more expansive surround sound setup. With advanced technologies like Dolby Atmos and DTS:X, the TX-SR8440 takes home cinema to new heights, offering a three-dimensional audio experience. The receiver also includes extensive connectivity options, including multiple HDMI inputs, USB inputs, and network capabilities for streaming high-resolution audio directly from music services. Additionally, the built-in Bluetooth technology facilitates wireless audio streaming from smart devices, enhancing convenience.

Each of these Onkyo models reflects the brand's commitment to delivering exceptional sound quality and versatility, making them ideal choices for home audio systems, regardless of the user's experience level. Whether for casual listening or immersive home theater experiences, the TX-SR304E, TX-SR404, and TX-SR8440 have features that cater to diverse needs and preferences, standing as testament to Onkyo's engineering excellence in audio technology.
Top Page Image Contents