3M MP8750 manual Menu Adjustments/Settings, Main Menu Description / Action Default Setting

Sub-Menu:Select the desired sub-menu (see Main Menu). Press the Disc Pad to the right or the Enter button to display the sub-menu.

Picture		(1)	The sub-menu name (1) is on the top line.
Height			A slider bar (2) at the right of a sub-menu line indicates
Brightness		(2)
			you can increase or decrease the value.
Contrast
			A number field (3) at the right of a sub-menu line
Optimize
Hor. Position			indicates that you can change it.
Ver. Position			A check box field at the right of a sub-menu line
Tracking	1312	(3)
			indicates that you can toggle that value On/Off by
Sync
ModeVESA 1024 x 768 75Hz			pressing the Enter button.
Resolution	1024 x 768

To change a slider bar value, it must be highlighted. Press the +/– button on the remote control or Bright +/– button on the operator touch panel to increase or decrease the value.

To change a number field, press the Disc Pad up or down to highlight (select) the menu line (3). Then press the +/– button on the remote control or Bright +/– button on the operator touch panel to increase or decrease the amount of the value.

4-5. Menu Adjustments/Settings

The following charts lists all the menu items that can be adjusted along with the default settings.

Main Menu	Description / Action	Default
		Setting
Picture	Display picture submenu
Audio	Display audio submenu
Tools	Display tools submenu
Source	Select input source	According
(drop down window)	(PC/RGB1 / PC/RGB2 / SVHS /	to search
	VIDEO 1 / VIDEO 2 / AUX)	procedure
User Interface	Display user interface submenu
Advanced Setup	Display advanced setup submenu
Info	Display information window
	(press Enter)
Picture (PC/RGB)	Description / Action	Default
Submenu Items		Setting
Height	Adjust projected image height
Brightness	Adjust the brightness
Contrast	Adjust the contrast
Optimize	Set best brightness for image
Hor. Position	Adjust horizontal position of image
Ver. Position	Adjust vertical position of image
Tracking	Adjust number of pixels per line
Sync	Adjust phase synchronization
Mode	Select data mode to adjust within this	<Automatic>
	menu (Predefined modes /
	User Mode 1…3)
Resolution	Select pixel resolution (640x350 /
(drop down window)	640x400 / 720x400 / 640x480 /
	800x600 / 832x624 / 1024x768 /
	1280x1024)

Main Menu

Picture

Audio

Tools

Signal source	PC/RGB1
User Interface
Advanced Setup
Info

Picture

Height

Brightness

Contrast

Optimize

Hor. Position

Ver. Position

Tracking 1312

Sync ModeVESA 1024 x 768 75Hz

Resolution 1024 x 768

© 3M 1999 3M™ Multimedia Projector MP8750 9