4-5. Menu Adjustments/Settings, continued
|
|
|
Advanced Setup | Description / Action | Default |
(PC/RGB) |
| Setting |
Submenu Items |
|
|
|
|
|
Projection (drop down | Select projection orientation | standard |
window) | (standard / Rear / Rear/Ceiling / |
|
| Ceiling) |
|
Remote Control | Remote control receiver | |
RC Address | Select remote control address | 1 |
| (1 / 2 / 3 / 4) |
|
Sync Mode1 | Select Sync Mode for PC/RGB1 | separate TTL |
(drop down window) | (separate TTL / composite TTL / |
|
| separate ana. / composite ana. / |
|
| sync on green) |
|
Sync Mode2 | Select Sync Mode for PC/RGB2 | separate TTL |
(drop down window) | (separate TTL / composite TTL / |
|
| separate ana. / composite ana. / |
|
| sync on green) |
|
SOG Level | Adjust level for sync on green |
|
| synchronization |
|
Reset Data Modes | Set all data modes to factory default |
|
| settings. |
|
Reset lamp display | Resets the lamp hours displayed on |
|
| the Info window |
|
Test | Display test submenu |
|
|
|
|
|
|
|
Advanced Setup | Description / Action | Default |
(Video) |
| Setting |
Submenu Items |
|
|
|
|
|
Projection | Select projection orientation | standard |
(drop down window) | (standard / Rear / Rear/Ceiling / |
|
| Ceiling) |
|
Remote Control | Remote control receiver | |
RC Address | Select remote control address | 1 |
| (1 / 2 / 3 / 4) |
|
Video standard | Select Video standard | automatic |
(drop down window) | (PAL B,G,H,I / NTSC M / SECAM / |
|
| NTSC 44 / PAL M / PAL N / PAL 60 / |
|
| NTSC COMB / automatic) |
|
Reset lamp display | Resets the lamp hours displayed on |
|
| the info window |
|
Test | Display test submenu |
|
Test | Description / Action | Default |
Submenu Items |
| Setting |
|
|
|
Parameter display | Parameter display window | |
|
| |
Color test picture | Display color test picture |
|
Frame test picture | Display frame test picture |
|
Info (display only) | Description / Action |
|
|
|
|
Hardware | Current hardware level |
|
Firmware | Current firmware level |
|
VESA xxxxxxxxxx | Current video mode |
|
Lamp (bar indicator) | Lamp life hours (Green: lamp good / |
|
| red: lamp needs replacement) |
|
OK! | Closes the Info display by pressing |
|
| the Enter button |
|
|
|
|
Advanced Setup
Projection | standard | |
Remote Control |
| |
RC Address | 1 | |
Sync Mode1 | separate TTL | |
Sync Mode2 | separate TTL | |
SOG level
Reset Data Modes
Reset lamp display
Advanced Setup
Projection | standard | ||
Remote Control |
|
|
|
RC Address | 1 | ||
Video standard | automatic | ||
Reset lamp display |
|
|
|
Test |
|
|
|
Test
Parameter display
Color test picture
Frame test picture
3M
MP8750
Hardware:
Firmware:
VESA 1024 x 768 75 Hz Lamp
OK!
© 3M 1999 | 3M™ Multimedia Projector MP8750 | 11 |