3M MP8770 manual Setup, Adjustment Item

ENGLISH

4.7 SETUP

The SETUP sub-menu is used to adjust and move the image position. The projector will display either the RGB (Figure 4.4) or Video (Figure 4.5) menu according to the input source being projected.

	RGB signal input			Video signal input
SETUP	INPUT	IMAGE	OPT.	SETUP	INPUT	IMAGE	OPT.
VOLUME				VOLUME
BRIGHT				BRIGHT
CONTRAST				CONTRAST
V POSIT		121		SHARPNESS
H POSIT		57		COLOR
H PHASE		7		TINT
H SIZE		800		COLOR BAL R
COLOR BAL R				COLOR BAL B
COLOR BAL B

Figure 4.4 RGB Signal			Figure 4.5 Video Signal
	Adjustment Item
	VOLUME	Decrease	Increase
	BRIGHT	Dark	Bright
	(BRIGHTNESS)
	CONTRAST	Lower	Higher
	SHARPNESS	Soft	Sharp
	COLOR	Less	More
	TINT	Red	Green
	V.POSIT	Moves the picture up or down.*
	(V.POSITION)
	H.POSIT	Moves the picture left or right.*
	(H.POSITION)
	H.PHASE	Decreases the picture flicker.*
	H.SIZE	Widens or Narrows the horizontal
		size of picture.*
	COLOR BAL R	Less red	More red
	COLOR BAL B	Less blue	More blue

*Auto Sync Function: Press the AUTO button on the remote control to engage the automatic sync function. The message

“AUTO IN PROGRESS” will display for several seconds as the projector adjusts the V. POSIT, H.POSIT. H.PHASE, & H. SIZE settings. Auto Adjust can also be executed using the operation buttons of the main unit. Hold down the RESET button and press the input switch (INPUT) button.

✔Note

•TINT cannot be adjusted with a PAL, SECAM, N-PAL or M-PAL video signal input.

•TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.

•V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input.

•Menu operation is not possible during freeze functions.

•Displaying the Setup menu will cancel the magnify and freeze functions.

16 3M™ Multimedia Projector MP8770 © 3M 2000