ENGLISH
2.3 System Setup - Connecting Various Equipment (continued)
BNC Connections
There are four kinds of usage for BNC connectors:
| Purpose |
| Usage of BNC |
|
| Menu Selection | |||
|
|
|
|
|
|
|
|
|
|
|
| R/Y(CV) | G/U | B/V |
| HS | VS | Selection1 | Selection2 |
|
|
|
|
|
|
|
|
|
|
Usage 1 | RGB Input | Red | Green | Blue |
| HS | VS | RGB3 | |
|
|
|
|
|
|
|
|
|
|
Usage 2 | Component Input | Y | U | V |
| NC | NC | VIDEO3 | YUV |
|
|
|
|
|
|
|
|
|
|
Usage 3 | CV | CV | NC | NC |
| NC | NC | VIDEO3 | CV/S |
|
|
|
|
|
|
|
|
|
|
Usage 4 | Y | C | NC |
| NC | NC | VIDEO3 | CV/S | |
|
|
|
|
|
|
|
|
|
|
(Note): NC No Connection
Usage 1: Selecting "RGB" determines the usage of BNC as RGB Input.
Usage 2: Selecting "VIDEO3" and "YUV" determines the usage of BNC as Component Input.
Usage 3/4: Selecting "VIDEO3" and "CV/S" determines the usage of BNC as CV or S. Usage of BNC as CV or S is determined automatically by detecting input signal by the projector.
On the above table, "Selecting 1" is done by direct "RGB" or "VIDEO" button of Oeration Panel or Remote Controller. Selection 2 is done by "MENU" button and selecting
Apple™ Desktop Mouse - The Macintosh operating system should recognize the MP8780 as a mouse without any drivers being loaded.
VirtualMouse for PC Computer - For IBM™ compatible computers, the operating systems will need to be set to "Serial Mouse," "PS/2 Mouse" or "USB Mouse" to recognize the projector as a mouse pointer device.
Change mouse driver information to "Serial Mouse", "PS/2 Mouse" or "USB Mouse".
a)Windows™ 95/Windows™ 98 - Click "Start;" select "Settings;" select "Control Panel." Click on "Mouse;" select the "General" tab; (see what driver is currently loaded and make note of it); select "Change;" select "Show all devices;" (make note of the current Manufacturer and Model); select "Standard Mouse Type" for Manufacturer; then select "Standard Serial Mouse" or "Standard PS/2 Mouse". Click OK to change and apply the new driver. Restart Windows if prompted.
b)Windows™ 3.1 - From "Program Manager" click "Main;" then click "Windows Setup," (make note of what the current mouse driver is); Click "Options;" then "Change Systems Settings." Choose "Mouse." It should be listed as "Microsoft or IBM PS/2."
✔Note
For proper mouse operation, always turn the projector power on first and then power up the computer.
For some laptop computers you may need to disable the internal pointing device (IPD). This is done through the BIOS level set up of the particular machine, or it could be listed in a "Utilities" program group, i.e., "Toshiba Utilities™," or "Thinkpad Features™."
10 | 3M™ Multimedia Projector MP8780 | © 3M 1999 |