English
3M™ Pocket Projector MPro150
Power Adapter
The power adapter is used to charge the battery or power the projector. There are four outlet adapters to give you the flexibility to power the 3M MPro150 in most countries.
You can also power the projector with the 3M MPro150 car charger, available separately.
Installing an Outlet Adapter onto the Power Adapter
1Select the outlet adapter that will plug into your wall outlet.
2Align the outlet adapter to the power adapter. Turn the outlet adapter in the direction of the “LOCK” arrow to lock it in place.
Replacing the Outlet Adapter
1Push the button on the outlet adapter.
2Turn the outlet adapter in the direction of the “OPEN” arrow.
3Remove outlet adapter.
4Replace with the new outlet adapter.
12 | © 2010 3M. All Rights Reserved. |