3M™ Pocket Projector MPro150
Charge the Battery
In normal brightness mode, the 3M MPro150 rechargeable battery gives you up to two hours of battery life. When the battery needs to be charged, the status indicator will flash red or the low battery message will display. The battery should be fully charged before using the MPro150 projector.
Charge the battery by connecting the 3M MPro150 power adapter to the projector. When the power adapter is connected, the battery status icon which normally displays is replaced by the power adapter icon.
1Turn the projector power off.
2Connect the power adapter to the projector’s DC input.
3Connect the other end of the power adapter into the electrical outlet.
4The status indicator will change to amber while the battery is charging.
5Allow three hours to fully charge the battery. When charging is complete, the status indicator will turn off.
English
3:00:00
Note: The battery status will not appear when the power adapter is connected to the projector. The power adapter icon will appear instead.
© 2010 3M. All Rights Reserved. | 13 |