3M MP8660 manual Safeguards, Intended USE

Page 3

Safeguards

INTENDED USE

Before operating the machine, please read the entire manual thoroughly. The 3M￿ Multimedia Projector MP8660 was designed, built and tested for use indoors, using 3M￿ brand lamps and nominal local voltages. The use of other replacement lamps, outdoor operation or different voltages has not been tested and could damage the projector or peripheral equipment and/or create a potentially unsafe operating condition.

IMPORTANT SAFEGUARDS

1.Read and understand all instructions before using. Pay particular attention to areas where this symbol ! is shown.

!WARNING ± Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

!Caution ± Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. It may also be used to alert against unsafe practices.

2.Close supervision is necessary when any appliance is used by or near children. Do not leave appliance unattended while in use.

3.Never look directly into the projector lens when the lamp is on. The metal halide lamp produces a strong light which could damage your eyesight.

!4. Care must be taken as burns can occur from touching hot parts.

5.Do not operate appliance with a damaged cord or if the appliance has been dropped or damaged Ð until it has been examined by a qualified service technician.

!6. Position the cord so that it will not be tripped over, pulled or contact hot surfaces.

7.If an extension cord is necessary, a cord with a current rating at least equal to that of the appliance should be used. Cords rated for less amperage than the appliance may overheat.

8.Always unplug appliance from electrical outlet before cleaning and servicing and when not in use. Grasp plug and pull to disconnect.

9.To reduce the risk of electric shock, do not immerse this appliance in water or other liquids.

10.To reduce the risk of electric shock, do not disassemble this appliance, but take it to a qualified technician when service or repair work is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used.

11.The use of an accessory attachment not recommended by the manufacturer may cause a risk of fire, electric shock, or injury to persons.

12.Connect this appliance to a grounded outlet.

!13. This unit is equipped with optical lenses and should not be exposed to direct sunlight.

14.Keep ventilation openings free of any obstructions.

15.Always remove the lens cap when the projection lamp is on.

16.The projection lamp contains mercury. Always dispose of it in a proper manner according to local regulations.

SAVE THESE INSTRUCTIONS

The information contained in this manual will help you operate and maintain your 3M MP8660 Multimedia Projector.

E 3M 1997

3M

￿

Multimedia Projector MP8660

1

 

 

ENGLISH

Image 3
Contents MP8660 Multimedia Projector Operators Guide Table of Contents Intended USE SafeguardsThank YOU for Choosing 3M WarrantyWhats Next? Contents of Shipping BoxUnpack Keep Your Packing MaterialsMachine Characteristics Product DescriptionParts Identification List Set Up Cable ConnectionsTerminal Connection Panel Monitor Loop-Through For IBM Compatible Computers Power ConnectionMAC Adapter Switch Settings Computer RGB Input ConnectionVideo Connection Video/Audio ConnectionMouse Interface Cable Connection Serial Mouse Cable PC Computer Control Cable 3rd Party Control BoxCarrying Handle Projector Set UpAmbient Light Distance to Viewing ScreenAdjusting the Projector Elevation Now What?Rear Projection Turning On the Projector Operating the ProjectorIndicator Lamps Special/Reset ButtonsProjector Control Panel On±Screen Menus Setup SUB±MENUS RGB, VideoVideo ± Setup SUB±MENU Setup SUB±MENUS RGB, VideoOption SUB±MENU Video System Adjusting Image Size and FocusAdjusting the Volume MAC Mode RGB onlyRemote Control How to Operate the Remote ControlRemote Control Buttons Replacing the Batteries Using the Mouse ButtonsChange Lamp Message Display or Reset Lamp Operation HoursLamp Information Metal Halide Projector LampChanging the Lamp MP8660 Lamp ReplacementCleaning MaintenanceCleaning Air Filters Probable Causes TroubleshootingService Information How to Order AccessoriesMP8660 Multimedia Projector Accessories Accessory Parts ListTable of Contents ±1. SpecificationsAppendix Technical Information ±3. Projector-to-Screen Distances ±2. S-Video Input Signal Terminal±5. Computer Video RGB Input Terminal ±4. Physical DimensionsPixel Horizontal Vertical Number KHz ±6. Computer RGB Signal Connection ModesADB Adaptor Cable ±7. Mouse Emulation ConnectionsSerial Mouse Cable PS/2 Adaptor Cable±8. Serial Interface Command Codes Command Code FormatsRS±232 Connection Cable Function 00±Remote control is disabled 01±Remote control is enabled Normal Invert ±10 Multimedia Projector MP8660 Were easy to reach

MP8660 specifications

The 3M MP8660 is a versatile and innovative projector designed to meet the needs of business professionals and educators seeking high-quality presentations. This projector stands out for its exceptional image quality, advanced connectivity options, and user-friendly features.

One of the main features of the 3M MP8660 is its impressive brightness level, reaching up to 4,500 lumens. This high brightness ensures that presentations are clear and visible even in well-lit environments. The projector also boasts a native resolution of 1080p, providing sharp and detailed images that enhance the overall viewing experience. This makes it an ideal choice for displaying intricate graphics, slideshows, and videos.

In terms of technologies, the 3M MP8660 utilizes DLP (Digital Light Processing) technology, which is known for producing vibrant colors and high contrast ratios. The projector supports a wide color gamut, ensuring that colors appear true to life, making it suitable for various applications, including educational settings and corporate meetings. Coupled with a long lamp life, rated at approximately 15,000 hours in eco-mode, users can enjoy extended usage before needing a replacement.

Another notable characteristic of the 3M MP8660 is its extensive connectivity options. It includes multiple HDMI inputs, VGA ports, and USB connections, allowing users to easily connect laptops, smartphones, and other devices. Additionally, the projector supports wireless connection, enabling seamless presentations without the hassle of cables. This flexibility empowers presenters to engage with their audience without being tethered to the projector.

The design of the MP8660 emphasizes portability, making it easy to transport to different locations. Weighing around 5.5 pounds and featuring a compact form factor, it is an excellent choice for on-the-go professionals. The intuitive user interface simplifies navigation and setup, ensuring that users can quickly prepare for presentations.

In summary, the 3M MP8660 is a high-performance projector that combines superior image quality, advanced DLP technology, and extensive connectivity options. Its portability and user-friendly features make it a top choice for both business and educational environments. Whether you're delivering a keynote speech or conducting a training session, the MP8660 delivers impressive results that captivate and engage audiences.