3M MP8725 manual Setup

4.3 SETUP

The SETUP sub-menu is used to adjust and move the image position. The projector will display either the RGB (Figure 4.4) or Video (Figure 4.5) menu according to the input source being projected.

ENGLISH

RGB signal input

S E T U P I N P U T I M A G E O P T .

VOLUME
BRIGHT
CONTRAST
V.POSIT	121	AUTO
H.POSIT	57
H.PHASE	7
H.SIZE	800
COLOR BAL

Figure 4.4 RGB Signal

Video signal input

S E T U P I N P U T I M A G E O P T .

VOLUME

BRIGHT

CONTRAST

SHARPNESS

COLOR

TINT

COLOR BAL

Figure 4.5 Video Signal

Adjustment Item	Details of adjustment		Default
VOLUME	Decrease	Increase
BRIGHT	Dark	Bright
(BRIGHTNESS)
CONTRAST	Lower	Higher
SHARPNESS	Soft	Sharp
COLOR	Less	More
TINT	Red	Green
V.POSIT	Moves the picture up or down.*
(V.POSITION)
H.POSIT	Moves the picture left or right.*
(H.POSITION)
H.PHASE	Decreases the picture flicker*
H.SIZE	Widens or Narrows the horizontal size of picture*
COLOR BAL	Red	Blue

*Select "Auto" to engage automatic adjustment function. The software application running on your computer must be at maximum screen size for the auto function to synchronize. It will take 20 seconds to reset field.

✔Note

•TINT cannot be adjusted with a PAL or M-PAL video signal input.

•TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input.

•V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input.

10 3M™ Multimedia Projector MP8725 © 3M 1999