LG Electronics RD-JT91, RD-JT92 owner manual Specifications, Operating Condition, Projector Lamp

Page 27

Information

Specifications

MODEL

RD-JT91

 

RD-JT92

 

 

 

 

resolution

800(Horizontal) x 600(Vertical)pixel

 

854(Horizontal) x 480(Vertical)pixel

 

 

 

 

horizontal / vertical ratio

4:3(horizontal:vertical)

 

16:9(horizontal:vertical)

 

 

 

DLP panel size

0.55 inches

screen size

1.01~5.08m(40~200 inches)

remote control distance

 

12m

speaker system

1W(mono)

zoom ratio

 

1:1.2

Video compatibility

NTSC/PAL/SECAM/NTSC4.43/PAL-M/PAL-N

Power

AC 100 - 240V~50/60Hz, 3A-1A, 260W

height(mm/inches)

100.7/3.9

breadth(mm/inches)

 

330/12.9

length(mm/inches)

220.1/8.7

 

 

 

 

Operating Condition

temperature

In operation : 32~104°F(0°C~40°C)

In storage and transit : -4~140°F(-20°C~60°C)

Projector Lamp

lamp model

AJ-LT91

humidity

In operation : 0~ 80% relative humidity by dry hygrometer

Not in operation : 0 ~ 90% relative humidity by dry hygrometer

lamp power consumption

200W

LAMP Replacement

WARNING : Lamp is no user replaceable part. Do not touch and open the lamp replace cover of bottom enclosure. It could cause injury and electric shock due to high temperature and voltage.

Only service personnel can replace lamp after minimum 3 min. from disconnect mains plug to avoid injury cause by high temperature of lamp.

*Applicable Lamp: Manufactured by USHIO Inc., type NSH200LG

27

Image 27
Contents RD-JT91 RD-JT92 DLP Projector Contents Safety Instructions Do not allow any objects to fall into the projector Never touch the power plug with a wet handPrevent dust collecting on the power plug pins or outlet Do not use too many plugs on the Mains multi-outletDo not drop the projector or allow impact shock Do not use water while cleaning the projectorIs not to be used for a long peri Service personnel Only use the specified type of batteryConnecting Part Names of partsMain Body Control Panel Installing Batteries Remote ControlProjector Status Indicators Optional Extras AccessoriesThis may cause overheating of the projector Installation and CompositionInstallation Instructions Installing and CompositionRD-JT91 Basic Operation of the ProjectorUsing Kensington Security System Adjust volume level Turning on the ProjectorTurning off the Projector Zoom ring Focus ring Selecting source modeFocus and Position of the Screen Image Press the Source buttonConnection Connecting to a Desktop PCConnecting to a Notebook PC ConnectionConnecting to a Video Source Connecting to a DVDConnecting to a D-TV Set-Top Box Function Adjusting VideoFunction APC Auto Picture ControlGamma Function Auto Color Temperature ControlFlip Vertical Function Using ARC FunctionSelecting language Flip Horizontal FunctionSelecting Blank Image color Using Keystone functionUsing Blank function Auto Source FunctionPress the Still button Lamp Mode FunctionUsing Still function Checking lamp timeScreen Position Clock / Phase FunctionPress the F, G button to adjust the screen condition Auto Tracking FunctionSupported Monitor Display InformationDVD/DTV Input Maintenance Cleaning the lensCleaning the Projector Case Specifications Operating ConditionProjector Lamp No 3828VA0482B b 373-026H
Related manuals
Manual 28 pages 44.98 Kb