TROUBLESHOOTING
Common Problems & Solutions
PROBLEMS | TRY THESE SOLUTIONS | |
|
| |
| • Make sure the power cord is inserted snuged into the AC | |
| adapter socket. | |
| • Make sure the power cord is inserted snuged into the | |
NO POWER | power outlet. | |
| • Wait 90 seconds after the projector is turned off before | |
| turning the projector back on. | |
| • Check whether Front Cover is closed. | |
|
| |
| • Check for the proper input source. | |
NO PICTURE | • Ensure all cables are connected properly. | |
| • Adjust the brightness and contrast. | |
|
| |
TRAPEZOID | • Reposition the unit to improve its angle on the screen. | |
IMAGE ON THE | • Use the Keystone correction key on the remote control | |
SCREEN | unit. | |
|
| |
POOR COLOR | • Select the correct video system. | |
• Adjust brightness, contrast, or saturation. | ||
| ||
|
| |
| • Press Auto on the control panel of the projector or the | |
| remote control unit to get better picture quality. | |
BLURRED | • Adjust the focus. | |
IMAGE | • Reposition the unit to improve its projection angle. | |
| • Ensure the distance between the unit and screen is within | |
| the adjustment range of the lens. | |
|
| |
REMOTE | • Replace the batteries with new ones. | |
• Make sure there is no obstacle between the remote control | ||
CONTROL DOES | ||
and the projector. | ||
NOT WORK | ||
• Make sure nothing is blocking the front and rear receivers. | ||
| ||
|
|
Status Messages
Description | ||
Messages | ||
| ||
|
| |
No Signal | Projector is searching for input. | |
|
| |
Out of Range | Input signal frequency exceeds the projector’s range. | |
|
| |
| The lamp has been in operation for over 1500 hours. The warn- | |
Replace the | ing message will display on screen. Repalce the lamp when | |
Lamp | the warning message displays or the projector may not be | |
| turned on. |
22 |
DLP Personal Projector