Safety Instructions
| Power | WARNING |
|
|
|
Do not use too many plugs on the same outlet.
It may result in overheating of the outlet and cause a fire hazard !
| Power | NOTES | |
|
|
|
|
Never touch the power plug with | Hold the plug firmly when unplug- | Prevent dust collecting on the | |
a wet hand | ging. If you pull the cord, it may | power plug pins or outlet. | |
This may cause an electric shock | be damaged. | This may cause a fire hazard ! | |
| |||
hazard ! |
|
| |
This may cause a fire hazard !
Do not plug when the power cord or the plug is damaged or any part of the power outlet is loose.
This may cause a fire or an electric shock hazard or damage to the unit!
Ensure the power cord does not come into contact with sharp or hot objects such as a heater.
This may cause a fire or an electric shock hazard or damage to the unit!
Place the projector where people will not trip or tread on the power lead.
This may cause a fire or an electric shock hazard or damage to the unit!
Do not turn the projector On/Off by
It may cause mechanical failure or could cause an electric shock.
| Using | WARNING |
|
|
|
Do not place anything containing liquid on top of the projector such as flowerpot, cup, cosmetics or candle.
This may cause a fire hazard or damage to the unit!
In case of impact shock or damage to the projector switch it off and unplug it from the power outlet and contact your service center.
This may cause a fire or an electric shock hazard or damage to the unit!
Do not allow any objects to fall into the projector.
This may cause an electric shock hazard or damage to the unit!
If water is spilt into the projector unplug it from the power outlet immediately and consult your Service Agent.
This may cause an electric shock hazard or damage to the unit!
Dispose of used batteries care- fully and safely.
In the case of a battery being swallowed by a child please consult a doctor immediately.
In the event that an image does not appear on the screen please switch it off and unplug it from the power outlet and contact your Service Agent.
This may cause a fire or an electric shock hazard or damage to the unit!
Do not remove any covers (except lens cover). Or there is a high risk of Electric Shock!
Don’t look directly onto the lens when the projector is in use. Eye damage may occur!
Do not touch metal parts during or soon after operation since the vents and lamp cover will remain very hot!
CAUTION concerning Power
Do not overload wall outlets. Overloaded wall outlets,loose or damaged wall outlets, extension cords, frayed power cords,or damaged or cracked wire insulation are dangerous.Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance. If its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service personnel.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
5