LG Electronics RD-JT91 owner manual Function, Adjusting Video, APC Auto Picture Control

Function

Function

*In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just example to help with the Projector operation.

*If there is no input signal present, the Menu will not be displayed on the screen.

*This operating guide explains operation of RGB(PC) mode mainly.

Video Menu Options

Adjusting Video

1.Press the MENU button and then use F, G button to select the menu.

2.Press the OK (A) button and then use D , E button to select a video item you want to adjust.

3.Press the F, G button to adjust the screen condition as you want.

●Each adjustment of menu options will not affect other input source.

As required, re-adjust menu options for the following input source : Video/S-Video/Component (480i(576i)), Component (480p(576p), 720p, 1080i)

●To restore the original image condition after changing it, press OK (A) button after selecting [Reset] item.

●In the broadcasting system NTSC, the picture item Tint is displayed and can be adjusted.

●To exit the menu display, repeatedly, press the MENU button.

		< RGB mode >
Contrast		50
Brightness		50
Color R		50
Color G		50
Color B		50
Reset
MENU prev.			move	F G adjust
	< Video mode >
APC			F	Clear	G
Contrast		80
Brightness		50
Color		50
Sharpness		50
MENU prev.			move	F G select

APC (Auto Picture Control)

*Use APC to set the projector for the best picture appearance.

*This function will not work in RGB mode.

1.Press the MENU button and then use F, G button to select the menu.

2.Press the OK (A) button and then use D , E button to select APC item.

3.Press the F, G button to adjust the screen condition as you want.

●Each press of the F, G button changes the screen as shown below.

Clear Soft User

APC	F	Clear	G
Contrast	80
Brightness	50
Color	50
Sharpness	50
MENU prev.	move	F G select

●To exit the menu display, repeatedly, press the MENU button.

19