Telex Stratus 50 manual Specifications, Receivers

Page 11

Specifications

Receivers:

Type: Dynamic

Frequency Response: 50 Hz - 10 kHz

Sensitivity: 95 ± 5 dB SPL (1 kHz, 1 mW input)

Impedance (Max. Volume):

 

Stereo

300 ohms per side

Monaural

150 ohms

Headset Power: 4AA Batteries or Panel Power from 8-32 Vdc

Microphone:

Element Type: Amplified noise-canceling electret

Frequency Response: 100 Hz - 3.5 kHz

Sensitivity:

-50 ± 6 dB (ref: 1V/ µbar at 1 kHz with 12 Vdc supply voltage and 470 ohm DC, 150 ohm AC load)

Matching Impedance:

50-600 ohms

Gain Adjustment Range: ± 5 dB (clockwise rotation increases gain)

Operating Voltage: 8-16 Vdc (supplied by aircraft radio)

Cordage:

Straight Y-cord, 9 ft (2.74 m)

Connectors:

Microphone Plug: PJ-068 or equivalent

Receiver Plug: PJ-055 or equivalent

DC Jack: 2.5mm Dia. Pin +

2.5mm 3 conductor audio jack for connection to cell phone connection 3.5mm 3 conductor audio jack for connection to auxiliary audio

Weight:

Effective Head Weight: Approximately 18.5 oz. (524 g)

Color: Dark Grey/Black

Page 9

Image 11
Contents Telex Stratus 50 Digital Reference View General Description Design Features See FigureAuto Shut-Off Microphone Bias Voltage RequirementsHeadset Operation Headset PowerMicrophone Placement Side View Top View Headband Size Adjustment Stratus Controls Microphone Gain AdjustmentEar Cushion Replacement Wiring Diagram Receivers SpecificationsOrdering Information Telex COMMUNICATIONS, INC. Limited Warranty Customer Service Page LIT000010 Rev a 04/2006