LG Electronics LS50 service manual Retainer

Page 7

Removing and replacing a part (FRU)

1040 Retainer

Remove the following parts in order before replacing this part

Battery Pack (1010)

Keyboard (1030)

1. Pull up the retainer, and remover the connector using a (-) type screwdriver.

Evite o uso de chaves metálicas nesta parte, por marcar facilmente use ferramenta plástica ou somente as mãos.

7

Image 7

Contents LG Electronics Removing and replacing a part FRU Battery PackHard Disk Drive Keyboard Removing and replacing a part FRU Disconnect the keyboard connector Retainer Fan Assembly 1SZZBZ4020A Optical Disk Drive 14.1 Model Optical Disk Drive 15 Model Wireless LAN Card MDC Modem Card Display Module Remove two hinge screws Removing and replacing a part FRU Removing and replacing a part FRU Key Deck Screw SpecificationOpen the I/O port cover and remove two screws Removing and replacing a part FRU Removing and replacing a part FRU Main Board Remove the RTC battery connector from M/B Remove the LAN S/B connector Remove the power cable Remove 4 M/B screws Hold M/B with your both hand and pull it up to remove 14.1 Battery Frame AssyVideo Sub-Board 1SZZBA4044B Removing and replacing a part FRU Removing and replacing a part FRU Remove 9 screws for 15 model or 8 screws for Removing and replacing a part FRU Remove LCD from the LCD rear panel