LG Electronics LS50 service manual Fan Assembly

Page 8

Removing and replacing a part (FRU)

1050 Fan Assembly

Remove the following parts in order before replacing this part
Battery Pack (1010)	Keyboard (1030)	Retainer (1040)

1. After removing a screw and the connector, pull up and remove the fan Assy using a (-) type screwdriver.

1

1

1

No.	FRU No.	Specification	EA

1	1SZZBZ4020A	M2.0 X L8.8	3

8

Image 8

Contents LG Electronics Battery Pack Removing and replacing a part FRUHard Disk Drive Keyboard Removing and replacing a part FRU Disconnect the keyboard connector Retainer Fan Assembly 1SZZBZ4020A Optical Disk Drive 14.1 Model Optical Disk Drive 15 Model Wireless LAN Card MDC Modem Card Display Module Remove two hinge screws Removing and replacing a part FRU Removing and replacing a part FRU Screw Specification Key DeckOpen the I/O port cover and remove two screws Removing and replacing a part FRU Removing and replacing a part FRU Main Board Remove the RTC battery connector from M/B Remove the LAN S/B connector Remove the power cable Remove 4 M/B screws Hold M/B with your both hand and pull it up to remove Battery Frame Assy 14.1Video Sub-Board 1SZZBA4044B Removing and replacing a part FRU Removing and replacing a part FRU Remove 9 screws for 15 model or 8 screws for Removing and replacing a part FRU Remove LCD from the LCD rear panel