Ch1. Service information
1-3. Safety information
General safety
Follow these rules to ensure general safety
·Observe good housekeeping in the area of the machines during and after maintenance.
·When lifting any heavy object
1.Ensure you can stand safely without slipping.
2.Distribute the weight of the object equally between your feet.
3.Use a slow lifting force. Never move suddenly or twist when you attempt to lift.
4.Lift by standing or by pushing up with your leg muscles
(This action removes the strain from the muscles in your back.)
·Do not attempt to lift any object weights more then 16kg(35lb) or object that you think are too heavy for you.
·Do not perform any action that causes hazards to the customer, or that makes the equipment unsafe.
·Before you start the machine, ensure that other service representatives and the customer’s personnel are not in a hazardous position.
·Place removed covers and other parts in a safe place, away from all personnel, while you are servicing the machine.
·Keep your tool box away from walk areas so that other people will not trip over it.
·Do not wear loose clothing that can be trapped in the moving parts of a machine. Make sure that your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it.
·Insert the ends of your necktie or scarf inside clothing or fasten it with a nonconductive clip, approximately
8centimeters(3 inches) from the end.
·Do not wear jewelry, chains,
·Wear safety glasses when you are hammering, drilling, soldering, cutting wire, attaching springs, using solvents, or working in any other conditions that might be hazardous to your eyes.
·After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective.
·Reinstall all covers correctly before returning the machine to the customer.
Caution
Metal objects are good electrical conductors.
4