Black Box RM610A-R2 Preface/Safety Information, Safety Safety Symbols Used in this Manual

Preface/Safety Information

Preface

This manual is provided to prevent service personnel from committing an act that results in the risk of fire, electric shock, or injury to persons. Only trained service personnel should receive, unpack, and assemble the Server Side-Mount Wall Cabinet. In addition, only trained service personnel should install equipment in enclosures.

Safety

Safety Symbols Used in this Manual

This manual provides general safety guidelines to be observed during installation, operation, and maintenance of the Server Side- Mount Wall Cabinet.

WARNING: Failure to follow directions in the warning could result in injury to persons or loss of life.

CAUTION: Failure to follow directions in the caution could result in damage to equipment or storage data.

Safety Considerations

WARNING: Improper handling and use of the RM610A-R2 could result in equipment damage, serious injury, or possible death.

Only trained service personnel should be used to remove the enclosure from the pallet. Also be sure you have a sufficient number of service personnel. Do not attempt to move enclosures by yourself.

Only UL® Listed ITE units should be installed inside the RM610A-R2.

Be sure to read and follow all individual manufacturer equipment manuals for safety and installation instructions.

The RM610A-R2 was not evaluated as a fire enclosure.

Proper spacing is required when installing electrical equipment to avoid electrical shock.

The ambient temperature operating range for the RM610A-R2 and accessories is +50 to +95° F (+10 to +35° C).

The non-operating temperature is -4 to +140° F (-20 to +60° C).

Page 4 724-746-5500 blackbox.com RM610A-R2