Dell R610 owner manual 1. LCD Status Messages continued

Table 1-1. LCD Status Messages (continued)

Code	Text	Cause	Corrective Actions
E1311	Fan module ##	RPM of specified fan in	See "Troubleshooting
	RPM exceeding	specified module is outside	System Cooling
	range. Check	of intended operating	Problems."
	fan.	range.
E1313	Fan	The system is no longer fan	Check LCD for additional
	redundancy	redundant. Another fan	scrolling messages. See
	lost. Check	failure would put the	"Troubleshooting a Fan."
	fans.	system at risk of over-
		heating.
E1410	System Fatal	A fatal system error has	Check LCD for additional
	Error	been detected.	scrolling messages.
	detected.		Remove AC power to the
			system for 10 seconds and
			restart the system.
			If the problem persists,
			see "Getting Help."
E1414	CPU # temp	Specified processor is out of	Ensure that the processor
	exceeding	acceptable temperature	heat sinks are properly
	range. Check	range.	installed. See
	CPU heatsink.		"Troubleshooting the
			Processors" and
			"Troubleshooting System
			Cooling Problems."
E1418	CPU # not	Specified processor is	Ensure that the specified
	detected.	missing or bad, and the	microprocessor is properly
	Check CPU is	system is in an unsupported	installed. See
	seated	configuration.	"Troubleshooting the
	properly.		Processors."
E141C	Unsupported	Processors are in an	Ensure that your
	CPU	unsupported configuration. microprocessors match
	configuration		and conform to the type
	Check CPU or		described in the
	BIOS		microprocessor technical
	revision.		specifications outlined in
			your system’s Getting
			Started Guide.

26

About Your System