Allied Telesis AT-WA7500, AT-WA7501 manual Configuring IP Tunnels, Parameter Explanation

Chapter 5: Configuring the Spanning Tree

Configuring IP Tunnels

For guidelines, see “About IP Tunnels” on page 140.

To configure the IP Tunnels screen

1.From the main menu, click IP Tunnels. The IP Tunnels screen appears.

2.Configure the IP tunnels parameters. For help, see the next table.

3.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

Table 43. IP Tunnel Parameter Descriptions

Parameter	Explanation
Mode	Choose the mode:
	Originate if Root: Lets the root access point and
	root candidates originate the IP tunnel if they are
	functioning as the root access point for the
	network.
	Listen: Configures access points that are
	designated bridges or designated bridge
	candidates for their remote IP subnets to serve as
	the endpoint of an IP tunnel.
	Disabled: Disables the IP tunnel port.

148