Allied Telesis AT-WA7500, AT-WA7501 manual Ethernet Parameter Descriptions

Chapter 3: Configuring the Ethernet Network

Table 17. Ethernet Parameter Descriptions

Parameter	Explanation
Port Type	Appears only if the access point has a fiber optic
	port.
	This field specifies the port that the access point
	uses to communicate with the Ethernet network:
	10/100 Mb Twisted-Pair: The access point
	communicates with the Ethernet network through
	the Ethernet port.
	100 Mb Fiber Optic: The access point
	communicates with the Ethernet network through
	the fiber optic port.
Link Speed	If Port Type is 100 Mb Fiber Optic, this field is
	automatically set to 100 Mbps Fiber Optic (full
	duplex).
	Choose the speed and duplex mode you want
	this port to use to communicate with the Ethernet.
	If you want the access point to auto-negotiate this
	field, choose Auto Select. Auto Select should
	work for most networks.
Enable Link Status	Check this check box if you want the access point
Check	to periodically check its Ethernet connection. If it
	loses the connection, this access point can no
	longer be the root access point and any end
	devices that are connected to this access point
	(whether or not it is the root) will roam to a
	different access point. The access point will
	attempt to reconnect to the spanning tree through
	one of its radio ports.
	Clear this check box if this access point must be
	the root access point or if it is used as a WAP.

78