Allied Telesis AT-WA7501, AT-WA7500 manual 211

AT-WA7500 and AT-WA7501 Installation and User’s Guide

To enable the EAS

1.Log in to the access point whose EAS you are enabling.

2.From the main menu, click Security > Embedded Authentication Server. The Embedded Authentication Server screen appears.

3.Check the Enable Server check box.

4.Click Submit Changes to save your changes.

5.Configure the parameters. For help, see the next table.

6.Click Submit Changes to save your changes. To activate your changes, from the menu bar click Save/Discard Changes, and then click Save Changes and Reboot. For help, see “Saving Configuration Changes” on page 46.

211