Allied Telesis AT-WA7501, AT-WA7500 manual Configuring the IP Address List, Iapp

Configuring the IP Address List

AT-WA7500 and AT-WA7501 Installation and User’s Guide

Table 43. IP Tunnel Parameter Descriptions (Continued)

Parameter	Explanation
Allow IP Multicast	Appears only if Mode parameter is Originate if
	Root.
	Determines if the root access point should
	forward IP multicast frames through its IP
	tunnels. Check this check box if you have a
	DHCP server issuing TCP/IP information to end
	devices.
Enable IGMP	Appears only if Mode parameter is Listen.
	Determines if IGMP is enabled or disabled.
Multicast Address	Appears only if Enable IGMP check box is
	checked.
	Enter the Class D IP multicast address. You also
	need to enter this IP address in the root access
	point’s IP address list. The Internet Assigned
	Numbers Authority has allocated 224.0.1.65 for
	Allied Telesyn’s inter-access-point protocol
	(IAPP).

On the root access point and root candidates, the IP address list contains the IP addresses or DNS names of all the access points at the endpoint of the IP tunnels. You can only configure this list if you set the Mode field to Originate If Root.

To configure the IP address list

1.From the main menu, click IP Tunnels > IP Addresses/DNS Names. The IP Addresses/DNS Names screen appears.

149