Allied Telesis AT-WA7501, AT-WA7500 manual Parameter Explanation

AT-WA7500 and AT-WA7501 Installation and User’s Guide

To configure the access point as a DHCP server

1.From the menu, click TCP/IP Settings. The TCP/IP Settings screen appears.

2.Verify that the IP Address field, IP Subnet Mask field, and IP Router field are configured. For help, see “Configuring the TCP/IP Settings” on page 65.

3.Configure the DHCP parameters to make this access point a DHCP server. For help, see the next table.

Table 15. DHCP Server Parameter Descriptions

Parameter	Explanation
DHCP Mode	Choose This AP is a DHCP Server. The access
	point must have a valid IP address and subnet
	mask.
DHCP Server	Enter the name for this access point as a DHCP
Name	server.

71